Oscilloscope Introduction

This page is INCOMPLETE and still missing some important information before it can be used as a resource. Please use the "Discussion" feature above or talk to one of the tutors if you would like to help improve it. Thanks!

---

This is the content required for an introduction to our [[Introduction for::Oscilloscope]] - reading this does NOT replace the mandatory session with a tutor! It will make it a lot quicker though ;-)

If you are ready for this introduction, please reach out to the following tutors:

Let's begin! First off, make sure you have read the machine's wiki page and manual.

Safety

As with any electric device, avoid humidity, don't operate with openend/damaged housing.

Personal protection: No specific personal protection equipment needed

Dangers	Precautions
High Voltages	<precaution 1>
Grounding Issues	<precaution 2> [...]
Short Circuits	<precaution 2> [...]

Probes

- Attenuation (1x / 10x)

[...]

Usage

1. Plugin the power cord to an outlet. 2. Press the power button. 3. Connect a probe to a channel terminal.

Suggested Reading

Artikelserie "Moderne Oszilloskop-Meßtechnik" des ELV Journals (Teil 10 fehlt):
Teil 1, Teil 2, Teil 3, Teil 4, Teil 5, Teil 6, Teil 7, Teil 8, Teil 9, Teil 11, Teil 12, Teil 13, Teil 14, Teil 15

Demonstration

The tutor will show you these steps in detail:

= The Auto Button

Manual Reset to Default

• Put Oscilloscope back to default mode