File:Laser cutter optimal focus.gif: Difference between revisions

From CoMakingSpace Wiki

(Pakue uploaded a new version of File:Laser cutter optimal focus.gif)
m (fixed dead link)
 
Line 1: Line 1:
== Summary ==
== Summary ==
Optimal focus setting of the Epilog Zing [[Laser cutter]] on the surface (for engraving etc.)
Optimal focus setting of the Epilog Zing [[Laser Cutter|laser cutter]] on the surface (for engraving etc.)
== Licensing ==
== Licensing ==
{{CC-by-sa-4.0}}
{{CC-by-sa-4.0}}

Latest revision as of 02:20, 5 February 2022

Summary

Optimal focus setting of the Epilog Zing laser cutter on the surface (for engraving etc.)

Licensing

This file is licensed under CC-BY-SA 4.0. You are allowed to use and alter this file freely as long as you share it under the same license and attribute the original author(s).

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current17:23, 30 November 2018Thumbnail for version as of 17:23, 30 November 2018360 × 256 (638 KB)Pakue (talk | contribs)smaller version
17:20, 30 November 2018Thumbnail for version as of 17:20, 30 November 2018600 × 426 (1.58 MB)Pakue (talk | contribs)Optimal focus setting of the Epilog Zing Laser cutter on the surface (for engraving etc.)

The following page uses this file: