Category:Jigs: Difference between revisions
From CoMakingSpace Wiki
m (DE synonyms) |
(M6 screws are especially useful) |
||
| Line 3: | Line 3: | ||
[[File:Horizontal drill jig.jpeg|thumb|right|simple fixture for horizontal drilling - usable, but most proper jigs take a bit more effort]] | [[File:Horizontal drill jig.jpeg|thumb|right|simple fixture for horizontal drilling - usable, but most proper jigs take a bit more effort]] | ||
They can usually be self-made! | '''They can usually be self-made!''' | ||
Good to know for adjustable jigs: M6 screws advance exactly 1 mm per turn. | |||
== Ideas == | == Ideas == | ||
Revision as of 12:05, 29 February 2020
Jigs (Vorrichtungen, Werkstatthilfen) are helpers for difficult standard operations, such as drilling angled holes, making specific cuts, or accurately repeating something.
They can usually be self-made!
Good to know for adjustable jigs: M6 screws advance exactly 1 mm per turn.
Ideas
Here are some ideas for commonly needed jigs if you feel inclined to make one:
- bench hook
- shooting board
- table saw sleds
- drill press table
- V-block for drilling into round or angled pieces
- should have a long "V" groove and a second "V" on the side, as shown here
Subcategories
This category has the following 5 subcategories, out of 5 total.
B
- Bandsaw Jigs (3 P)
D
- Drill Jigs (2 P)
H
- Handheld Router Jigs (2 P)
S
- Sliding Table Saw Jigs (2 P)
T
- Table Saw Jigs (2 P)
Pages in category "Jigs"
The following 7 pages are in this category, out of 7 total.
