Handheld Drill Introduction: Difference between revisions
From CoMakingSpace Wiki
(Created page with "This is the content required for an introduction to our handheld power drills - '''reading this does NOT replace the mandatory session with a tutor!''' It will make it...") |
(added some points that came up when writing the drill press introduction) |
||
| Line 1: | Line 1: | ||
This is the content required for an introduction to our handheld power [[drills]] - '''reading this does NOT replace the mandatory session with a [[tutor]]!''' It will make it a lot quicker though ;-) | This is the content required for an introduction to our handheld power [[drills]] (including [[Cordless Drills|cordless drills]], but NOT the [[Drill Press|drill press]] - '''reading this does NOT replace the mandatory session with a [[tutor]]!''' It will make it a lot quicker though ;-) | ||
Let's begin! First off, make sure you have read the machine's manual, if available (check its "InfoBox" in the wiki for instructions how to find it). | Let's begin! First off, make sure you have read the machine's manual, if available (check its "InfoBox" in the wiki for instructions how to find it). | ||
| Line 12: | Line 12: | ||
* stay clear of the chuck when in operation - use a secondary handle if possible | * stay clear of the chuck when in operation - use a secondary handle if possible | ||
* unplug the drill when changing a bit or touching the chuck for any other reason | * unplug the drill when changing a bit or touching the chuck for any other reason | ||
* be prepared for sudden movements of the | * be prepared for sudden movements of the tool or your workpiece, especially when using large diameter drill bits or [[Hole Saw|hole saws]] | ||
** firmly hold the tool's handle(s) and secure your workpiece with [[clamps]] or in a [[vise]] | |||
== Suggested Reading == | == Suggested Reading == | ||
Besides these safety notes, you should read about the different [[Drill Bits|drill bits]] to know what you're doing! '''Different materials usually require different bits.''' | Besides these safety notes, you should read about the different [[Drill Bits|drill bits]] to know what you're doing! '''Different materials usually require different bits, and the drilling speed depends on the bit as well as the type of material.''' | ||
[[Category:Introductions]] | [[Category:Introductions]] | ||
[[Category:Power Tools]] | [[Category:Power Tools]] | ||
Revision as of 21:41, 14 March 2018
This is the content required for an introduction to our handheld power drills (including cordless drills, but NOT the drill press - reading this does NOT replace the mandatory session with a tutor! It will make it a lot quicker though ;-)
Let's begin! First off, make sure you have read the machine's manual, if available (check its "InfoBox" in the wiki for instructions how to find it).
Safety
Dangers
- exposed & rapidly spinning chucks
- possible kickback due to a drill bit that binds with the material
Precautions
- do not wear gloves, they could get caught!
- stay clear of the chuck when in operation - use a secondary handle if possible
- unplug the drill when changing a bit or touching the chuck for any other reason
- be prepared for sudden movements of the tool or your workpiece, especially when using large diameter drill bits or hole saws
Suggested Reading
Besides these safety notes, you should read about the different drill bits to know what you're doing! Different materials usually require different bits, and the drilling speed depends on the bit as well as the type of material.
