Project:Container on Rollers: Difference between revisions
(Created page with "After buying a new desk with a wild oak plate I needed a wild oak container on roles for under the desk. Couldn’t find any suitable ones online and a custom made one was t...") |
No edit summary |
||
| Line 1: | Line 1: | ||
{{ProjectInfoBox | {{ProjectInfoBox | ||
|project title= Wooden container on roles for desk | |project title= Wooden container on roles for desk | ||
|image= | |image=Container on roles.png | ||
|status= finished | |status= finished | ||
|date= November 2021 | |date= November 2021 | ||
| Line 15: | Line 13: | ||
* 25€ Oil, brush | * 25€ Oil, brush | ||
}} | }} | ||
After buying a new desk with a wild oak plate I needed a wild oak container on roles for under the desk. | |||
Couldn’t find any suitable ones online and a custom made one was too expensive and also not 100% according to my idea (invisible roles). So I decided to create one myself. | |||
[[File:Screenshot 2021-11-09 at 10.37.54.png|thumb]] | [[File:Screenshot 2021-11-09 at 10.37.54.png|thumb]] | ||
[[File:Container on roles.png|thumb]] | |||
<br clear="left"> | |||
[[File:6 finished body.jpg|thumb]] | |||
==Building Process== | ==Building Process== | ||
[[File:6 roles.jpg|thumb]] | |||
| Line 26: | Line 33: | ||
3) Add holes for srews with an undercover Jig into the bottom, sides and back. From outside the screws will not be visible. | 3) Add holes for srews with an undercover Jig into the bottom, sides and back. From outside the screws will not be visible. | ||
[[File:Step 3) - undercover Jig.jpg|thumb]] | [[File:Step 3) - undercover Jig.jpg|thumb]] <br clear="left"> | ||
[[File:4 holes.jpg|thumb]] | |||
4) Drill lines of holes all with the same depth and distance to both side plates, so that the shelf inside the container can be moved in height later. | 4) Drill lines of holes all with the same depth and distance to both side plates, so that the shelf inside the container can be moved in height later. | ||
| Line 34: | Line 42: | ||
7) Add the hinge to the door. Invest in a cheap template to know exactly where to drill the whole in the wood (Forstner Bohrersatz) | 7) Add the hinge to the door. Invest in a cheap template to know exactly where to drill the whole in the wood (Forstner Bohrersatz) | ||
[[File:2 wood panels.jpg|thumb]] | [[File:2 wood panels.jpg|thumb]] <br clear="left"> | ||
8) Build the drawer but buy the drawer rail first to know the exact widths of the rails which needs to be considered for the width of the drawer. | 8) Build the drawer but buy the drawer rail first to know the exact widths of the rails which needs to be considered for the width of the drawer. | ||
[[File:8 drawer.jpg|thumb]] | |||
9) Add the front to the finished drawer when it | 9) Add the front to the finished drawer when it | ||
[[File:9 drawer and door.jpg|thumb]] | |||
Revision as of 20:53, 29 November 2021
| ProjectInfoBox Wooden container on roles for desk | |
|---|---|
| |
| Status: | finished |
| Release Date: | November 2021 |
| Initiator: | Hanna |
| Approx. Cost: | ~215€ (+50€ on tools):
|
After buying a new desk with a wild oak plate I needed a wild oak container on roles for under the desk.
Couldn’t find any suitable ones online and a custom made one was too expensive and also not 100% according to my idea (invisible roles). So I decided to create one myself.
Building Process
1) Draw a sketch of the container and calculate needed wood. I used glued wild oak panels (Leimholzplatten) from Bauhaus. I decided to put the base plate inside the container so that the roles will be hidden at the end and the container “floating” over the floor.
2) Saw the wood panels for the two sides, back, top, bottom, shelf, and front (two parts for the door and drawer) with the plunge saw
3) Add holes for srews with an undercover Jig into the bottom, sides and back. From outside the screws will not be visible.
_-_undercover_Jig.jpg)
4) Drill lines of holes all with the same depth and distance to both side plates, so that the shelf inside the container can be moved in height later.
5) Before assembling, sand all parts (tip: do one more sanding round with slightly moistened wood to make it extra smooth) and oil it
6) Assemble all parts, start with sides, back and top and add the bottom when wheels have already been attached to make sure it has the perfect height.
7) Add the hinge to the door. Invest in a cheap template to know exactly where to drill the whole in the wood (Forstner Bohrersatz)
8) Build the drawer but buy the drawer rail first to know the exact widths of the rails which needs to be considered for the width of the drawer.
9) Add the front to the finished drawer when it
