File:Bandsaw teeth position on flat wheels.JPG: Difference between revisions
From CoMakingSpace Wiki
Contrary to what it often says in the manual, a bandsaw blade should '''not''' always be tracking centrally on its wheel. The teeth should extend over the edge of '''flat''' wheels, so they don't loose their set ''(Schränkung)'' beca... |
(No difference)
|
Latest revision as of 11:49, 2 November 2018
Summary
Contrary to what it often says in the manual, a bandsaw blade should not always be tracking centrally on its wheel. The teeth should extend over the edge of flat wheels, so they don't loose their set (Schränkung) because of the pressure!
Licensing
This file is licensed under CC-BY-SA 4.0. You are allowed to use and alter this file freely as long as you share it under the same license and attribute the original author(s).
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Thumbnail | Dimensions | User | Comment | |
|---|---|---|---|---|---|
| current | 11:49, 2 November 2018 |  | 1,080 × 1,920 (433 KB) | Lukas (talk | contribs) | Contrary to what it often says in the manual, a bandsaw blade should '''not''' always be tracking centrally on its wheel. The teeth should extend over the edge of '''flat''' wheels, so they don't loose their set ''(Schränkung)'' beca... |
You cannot overwrite this file.
File usage
The following page uses this file:
