Material:Plywood: Difference between revisions

From CoMakingSpace Wiki

No edit summary
(→‎Poplar Plywood: linked laser engraving photos)
Line 40: Line 40:
|tools=[[Laser Cutter|laser cutter]], [[Wood Drill Bits|wood drill bits]], wood [[saws]]
|tools=[[Laser Cutter|laser cutter]], [[Wood Drill Bits|wood drill bits]], wood [[saws]]
}}
}}
Poplar plywood is very soft and bright which makes it great for [[Laser Cutting|laser cutting or engraving]]. It's often already warped when you buy it - try cutting it up into flatter pieces before you begin your actual project!
Poplar plywood is very soft and bright which makes it great for [[Laser Cutting|laser cutting or engraving]], especially [[Laser Engraving Photos|laser engraving photos]]. It's often already warped when you buy it - try cutting it up into smaller, flatter pieces before you begin your actual project!


Bauhaus is a sourcing option for this type of plywood as well, they sell different thicknesses of 100{{x}}70 cm sheets as well as DIN A3 "hobby kits" (cheap, but may contain poor quality pieces you only discover when unpacking).
Bauhaus is a sourcing option for this type of plywood as well, they sell different thicknesses of 100{{x}}70 cm sheets as well as DIN A3 "hobby kits" (cheap, but may contain poor quality pieces you only discover when unpacking).

Revision as of 13:41, 25 January 2018

MaterialInfoBox

Plywood

Material-default.png
Synonyms: DE: Sperrholz
Suggested Tools: see individual sections

Plywood is an engineered wood consisting of several layers of veneers (DE: Funiere) stacked with crossing (versperrten) grain directions. Wood glue ensures the layers are tightly bonded. The resulting material has little to no internal effects of grain direction. Cheap plywood often has veneers of inferior quality as its "invisible" layers which may become evident when laser cutting. Read more about the basics over at OpenDesk.

There are several types of plywood. For example, poplar plywood is rather cheap but will readily warp due to moisture. Baltic birch plywood is harder, more stable and more expensive.

The sheets found in hardware stores are often too large to fit into a laser cutter or a scroll saw but can be cut easily when properly clamped down.


Baltic Birch Plywood

MaterialInfoBox

Baltic Birch Plywood

Plywood part.jpg
Synonyms: multiply birch plywood;
DE: Birke Multiplex, Birkensperrholz
Suggested Tools: wood saws, wood drill bits, laser cutter

Baltic birch plywood has good structural and aesthetic qualities which makes it well-suited for a multitude of projects.

It is available nearby at Bauhaus in various sizes. Also check the offcuts section for cheaper pieces! One local retailer with a larger variety is Schoell Modellbau.


Poplar Plywood

MaterialInfoBox

Poplar Plywood

Material-default.png
Synonyms: cottonwood/aspen plywood;
DE: Pappelsperrholz
Suggested Tools: laser cutter, wood drill bits, wood saws

Poplar plywood is very soft and bright which makes it great for laser cutting or engraving, especially laser engraving photos. It's often already warped when you buy it - try cutting it up into smaller, flatter pieces before you begin your actual project!

Bauhaus is a sourcing option for this type of plywood as well, they sell different thicknesses of 100 × 70 cm sheets as well as DIN A3 "hobby kits" (cheap, but may contain poor quality pieces you only discover when unpacking).