Material:Threaded Inserts: Difference between revisions
From CoMakingSpace Wiki
(moved from Material:Nuts) |
(linked installation jig, more synonyms) |
||
| Line 2: | Line 2: | ||
|material name=Threaded Inserts | |material name=Threaded Inserts | ||
|image= | |image= | ||
|synonyms=DE: Einschraubmuttern, Einschraubmuffen,<br>RAMPA-Muffen | |synonyms=DE: Einschraubmuttern, Einschraubmuffen,<br>RAMPA-Muffen, Gewindemuffen,<br>Verbundmuttern, DIN 7965 | ||
|available= | |available= | ||
|donation= | |donation= | ||
|location= | |location= | ||
|tools=[[Wood Drill Bits|wood drill bits]], [[screwdrivers]] | |tools=[[Wood Drill Bits|wood drill bits]], [[screwdrivers]], [[countersinks]] | ||
|used with=[[Metric Screws|metric screws]], [[wood]] | |used with=[[Metric Screws|metric screws]], [[wood]] | ||
|contains= | |contains= | ||
|similar=[[T-Nuts|T-nuts]] | |similar=[[T-Nuts|T-nuts]] | ||
}} | }} | ||
Threaded | Threaded inserts can give you a metric thread in a piece of [[wood]] that is not very visible from the outside. The mounting hole always needs to be pre-drilled and countersunk, then they can be screwed in with an appropriate [[screwdriver]], [[Hex Key|hex key]] or - best of all - a metric screw coming perfectly straight from a simple installation jig like [https://www.holzwerken.net/blog/guido-henn/gewindemuffen-genau-senkrecht-eindrehen/ this one ''(Guido Henn/HolzWerken - DE)'']. | ||
Here are some tricks for inserting them at a right angle: | Here are some additional tricks for inserting them at a right angle: | ||
* [http://www.holzwerken.net/Wissen/Tipps-Tricks/Tischlern/Einschraubmuffen-So-geht-es-im-rechten-Winkel-ins-Holz ''HolzWerken.net (DE)''] | * [http://www.holzwerken.net/Wissen/Tipps-Tricks/Tischlern/Einschraubmuffen-So-geht-es-im-rechten-Winkel-ins-Holz ''HolzWerken.net (DE)''] | ||
* [https://www.befestigungsfuchs.de/blog/einschraubmuttern-gerade-eindrehen-so-funktioniert-es/ ''Befestigungsfuchs.de (DE)''] | * [https://www.befestigungsfuchs.de/blog/einschraubmuttern-gerade-eindrehen-so-funktioniert-es/ ''Befestigungsfuchs.de (DE)''] | ||
[[Category:Metal Parts]] | |||
Revision as of 11:37, 2 July 2024
| MaterialInfoBox Threaded Inserts | |
|---|---|
| |
| Synonyms: | DE: Einschraubmuttern, Einschraubmuffen, RAMPA-Muffen, Gewindemuffen, Verbundmuttern, DIN 7965 |
| Suggested Tools: | wood drill bits, screwdrivers, countersinks |
| Used with: | metric screws, wood |
| Similar (More or Less): | T-nuts |
Threaded inserts can give you a metric thread in a piece of wood that is not very visible from the outside. The mounting hole always needs to be pre-drilled and countersunk, then they can be screwed in with an appropriate screwdriver, hex key or - best of all - a metric screw coming perfectly straight from a simple installation jig like this one (Guido Henn/HolzWerken - DE).
Here are some additional tricks for inserting them at a right angle:
