Project:Stock Chair: Difference between revisions
From CoMakingSpace Wiki
No edit summary |
mNo edit summary |
||
| Line 5: | Line 5: | ||
|date=2023 | |date=2023 | ||
|initiator={{M}} | |initiator={{M}} | ||
|materials=Wood, Seat Webbing | |materials=[[Wood]], [[Wood Glue]], Seat Webbing | ||
|tools=[[Jointer-Planer]], [[Table Saw]],<br> [[Chop Saw]], [[Plunge Saw]], [[Handheld Router]],<br>[[Eccentric Sander]], Shaper Origin, Staple Gun | |tools=[[Jointer-Planer]], [[Table Saw]],<br> [[Chop Saw]], [[Plunge Saw]], [[Handheld Router]],<br>[[Eccentric Sander]], Shaper Origin, Staple Gun | ||
|software= | |software= | ||
Revision as of 18:26, 13 August 2023
| ProjectInfoBox Stock Chair | |
|---|---|
| |
| Status: | prototype completed |
| Release Date: | 2023 |
| Initiator: | Mitja |
| Materials Used: | Wood, Wood Glue, Seat Webbing |
| Tools Used: | Jointer-Planer, Table Saw, Chop Saw, Plunge Saw, Handheld Router, Eccentric Sander, Shaper Origin, Staple Gun |
This Stock Chair is built based on the premium project instructions on ShaperHub. It is using one single piece of stock hardwood which is then cut into the different parts of the chair.
