Project:Face Shields: Difference between revisions
From CoMakingSpace Wiki
(First draft) |
NitramLegov (talk | contribs) mNo edit summary |
||
| Line 1: | Line 1: | ||
Shortly after the [https://www.bundesregierung.de/breg-de/themen/coronavirus/hackathon-der-bundesregierung-1733632 #WirvsVirus hackathon] the 3D printing community in Heidelberg started printing face shields and other urgently needed equipment at home. Our [[3D | Shortly after the [https://www.bundesregierung.de/breg-de/themen/coronavirus/hackathon-der-bundesregierung-1733632 #WirvsVirus hackathon] the 3D printing community in Heidelberg started printing face shields and other urgently needed equipment at home. Our [[3D Printers]] were temporary relocated to members' homes as well. | ||
The whole effort is coordinated locally by Uniklinikum Heidelberg in collaboration with [http://medprint.org/ MedPrint.org]. | The whole effort is coordinated locally by Uniklinikum Heidelberg in collaboration with [http://medprint.org/ MedPrint.org]. | ||
We are also printing the [https://www.prusaprinters.org/prints/25857 Prusa Protective Face Shield]. | We are also printing the [https://www.prusaprinters.org/prints/25857 Prusa Protective Face Shield]. | ||
Printed parts need to be sterilized before use, see the [https://help.prusa3d.com/en/article/prusa-face-shield-disinfection_125457 sterilization guide]. | Printed parts need to be sterilized before use, see the [https://help.prusa3d.com/en/article/prusa-face-shield-disinfection_125457 sterilization guide]. | ||
Latest revision as of 13:47, 5 August 2022
Shortly after the #WirvsVirus hackathon the 3D printing community in Heidelberg started printing face shields and other urgently needed equipment at home. Our 3D Printers were temporary relocated to members' homes as well. The whole effort is coordinated locally by Uniklinikum Heidelberg in collaboration with MedPrint.org.
We are also printing the Prusa Protective Face Shield. Printed parts need to be sterilized before use, see the sterilization guide.
