Project:Tigerente
| ProjectInfoBox Tigerente | |
|---|---|
| File:Todo.jpeg | |
| Status: | In Progress |
| Release Date: | Jan 19 |
| Initiator: | Kenomat |
| Materials Used: | leftover wood, acrylic kid-compatible paint (saliva and sweat-resistant), rounded hardwood stick (~ 9 mm) |
| Tools Used: | Scroll Saw, Drill Press, Hole Saw, Printer, Sandpaper |
| Approx. Cost: | marginal, acrylic toy-safe paint is ~ 4€ per 50ml |
The Tigerente[1] is a popular German childhood figure. I decided to make one as a simple woodworking project. This is a quick and easy project which can probably finished in one two two sessions, with the longest periods by far consist of waiting for the glue or paint to dry.
Parts
Body
I selected a piece of leftover pine board roughly 40x20x2cm. I sawed the board in half and glued both halves together to achieve a thickness of 4cm, making the toy more stable. I downloaded a sassy image of the Tigerente that I liked (search for "Tigerente", there are plenty) and printed it on a piece of paper. Glued that on the wood and cut out the outlines on the scroll saw. Sanded down rough corners and edges until I was happy with the form with 80 and then 120 grit paper.
Wheels
Selected another piece of leftover wood with a thickness of 2 cm and cut out wheels using a hole saw and, ideally, a drill press. Try to find a diameter that looks good optically, go for the larger diameter if in doubt (toy will will easier). Sand down the wheels. If your wheels end up eccentric (like mine did because I used a handheld drill), consider threading them onto a metal screw, affixing that to a drill and using the drill to sand down the wheels.
Painting
Paint body and wheels whichever way you fancy. Typically black and yellow. Regarding the paint: You are looking for paint that is "Speichelecht" and "Schweißfest". Use multiple layers, sanding in between layers with 120 or 180 grit until satisfied with paint coverage. If you want to go all the way, apply a layer of shellac for a nice shine and a silky surface feel.
Assembly
Take a wooden round hardwood stick and saw from it two pieces of a length of (body thickness + 2x wheel thickness + ~3 mm) for your axles. The 3 mm wiggle room allow the wheels some freedom to turn apart from the body. Drill out the diameter of the wheel bores to the thickness of the axles. Drill two holes in the duck body where the wheels should go, using a drill that's 1-2 mm wider than the axle. Glue one wheel on each axle, thread axles trough the body, glue on other wheel. Sand down and paint over wheel if required.
Optionally
- Drill a small hole in the center of the front part of the duck and screw in a noosed hook. Attach a length of string, so your kid can pull it.
- Glue some black threads to the top as hair (which the Tigerente has sometimes).
- Give present to other parent's kids, feeling smug that you give higher quality toys to them than their parents do. Be frustrated that kid doesn't appreciate your craftsmanship and plays with the doll singing the "Frozen" Theme over and over again anyways.
