User:MobiTobi: Difference between revisions
From CoMakingSpace Wiki
Line 72: | Line 72: | ||
|DO use masking tape; <br> 2 passes | |DO use masking tape; <br> 2 passes | ||
|- | |- | ||
!PMMA (acrylic glass) black | |||
|2024-11 | |||
|2 mm | |||
|cut | |||
|26 | |||
|100 | |||
| | |||
| | |||
| | |||
| | |||
!PMMA (acrylic glass) extruded | !PMMA (acrylic glass) extruded | ||
|2024-11 | |2024-11 |
Revision as of 22:42, 15 January 2025
Welcome to my page :^)
I am a new member of the comakingspace and new to most tools in the shop.
My current projects are learning to use Autodesk Fusion and the laser cutter.
When I have my materials and introduction to the machine, I already have a bunch of laser cutter projects on my todo list. I want to start small with a bunch of board game knick-knacks, drawer organisers, desk doodads and stationery accessories. Down the line I want to learn about 3D printing and create some basic ATLAS compatible drawer housings.
Always keen to collaborate in block printing projects :D
Currently I am working on a guide on how-to design collapsible designs using slot and tab joints.
Materials
Material | Date
(YYYY-MM) |
Thickness | Operation | Speed (mm/s) | Power (%) | Corner power | Scan gap ("resolution") | Focus | Comments | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Plywood 3mm Bubinga (ROBOTIME) | 2024-10 | 3 mm | cut | 26 | 100 | surface | kerf 0.1 mm | ||||||||||||
Plywood 3mm yellow Lime (ROBOTIME) | 2024-10 | 3 mm | cut | 26 | 100 | surface | |||||||||||||
Plywood 3mm yellow Lime (ROBOTIME) | 2024-10 | 3 mm | bleech | 500 | 20 | surface | do NOT use masking tape | ||||||||||||
Plywood 3mm yellow Lime (ROBOTIME) | 2024-10 | 3 mm | engraving | 200 | 40 | surface | DO use masking tape; 2 passes | ||||||||||||
PMMA (acrylic glass) black | 2024-11 | 2 mm | cut | 26 | 100 | PMMA (acrylic glass) extruded | 2024-11 | 3 mm | cut | 35 | 100 | surface | kerf:0.1 mm | ||||||
PMMA (acrylic glass) extruded | 2024-11 | 3 mm | cut | 45 | 100 | surface | kerf: 0.06 mm | ||||||||||||
PMMA (acrylic glass) extruded | 2024-11 | 6 mm | cut | 6 | 100 | surface | visible difference between top and bottom edge; at speed 4 and 8 cutting edges looked less clean | ||||||||||||
PMMA (acrylic glass) extruded white | 2024-11 | 3 mm | cut | 20 | 100 | - 1mm | |||||||||||||
PE Foam for LEDs | 2024-11 | 2 mm | cut | ? | ? | surface | |||||||||||||
PE Foam high density | 2024-11 | 2 mm | cut | ? | ? | surface |