User:MobiTobi: Difference between revisions

Latest revision as of 19:16, 6 December 2024

Welcome to my page :^)

I am a new member of the comakingspace and new to most tools in the shop.

My current projects are learning to use Autodesk Fusion and the laser cutter.

When I have my materials and introduction to the machine, I already have a bunch of laser cutter projects on my todo list. I want to start small with a bunch of board game knick-knacks, drawer organisers, desk doodads and stationery accessories. Down the line I want to learn about 3D printing and create some basic ATLAS compatible drawer housings.

Always keen to collaborate in block printing projects :D

Currently I am working on a guide on how-to design collapsible designs using slot and tab joints.

Materials

Material	Date (YYYY-MM)	Thickness	Operation	Speed (mm/s)	Power (%)	Focus	Comments
Plywood 3mm Bubinga (ROBOTIME)	2024-10	3 mm	cut	26	100	surface	kerf 0.1 mm
Plywood 3mm yellow Lime (ROBOTIME)	2024-10	3 mm	cut	26	100	surface
Plywood 3mm yellow Lime (ROBOTIME)	2024-10	3 mm	bleech	500	20	surface	do NOT use masking tape
Plywood 3mm yellow Lime (ROBOTIME)	2024-10	3 mm	engraving	200	40	surface	DO use masking tape; 2 passes
PMMA (acrylic glass) extruded	2024-11	3 mm	cut	35	100	surface	kerf:0.1 mm
PMMA (acrylic glass) extruded	2024-11	3 mm	cut	45	100	surface	kerf: 0.06 mm
PMMA (acrylic glass) extruded	2024-11	6 mm	cut	6	100	surface	visible difference between top and bottom edge; at speed 4 and 8 cutting edges looked less clean
PMMA (acrylic glass) extruded white	2024-11	3 mm	cut	20	100	- 1mm
PE Foam for LEDs	2024-11	2 mm	cut	?	?	surface
PE Foam high density	2024-11	2 mm	cut	?	?	surface

@@ Line 116: / Line 116: @@
 |
 |-
-!Hartfaserplatte roh
+!PE Foam for LEDs
 |2024-11
-|3.2 mm
+|2 mm
 |cut
-|16
+|?
-|100
+|?
 |
 |
-| <nowiki>- 1mm</nowiki>
+| surface
-|Edges covered in soot. Post-processing necessary. <br> Avoids putrid smell of hdf
+|
+|-
+!PE Foam high density
+|2024-11
+|2 mm
+|cut
+|?
+|?
+|
+|
+| surface
+|
 |-
 |}