User:MobiTobi: Difference between revisions

From CoMakingSpace Wiki

(update Robotime parameters)
Line 33: Line 33:
|100
|100
|
|
|
|in focus
|kerf 0.1 mm
|-
!Plywood 3mm yellow Lime  (ROBOTIME)
|
|3 mm
|cut
|30
|100
|
|
|
|
|in focus
|
|
|-
|-
Line 40: Line 51:
|
|
|3 mm
|3 mm
|cut
|bleech
|500
|20
|
|
|in focus
|do NOT use masking tape
|-
!Plywood 3mm yellow Lime  (ROBOTIME)
|
|
|3 mm
|engraving
|200
|40
|
|
|
|in focus
|DO use masking tape; <br> 2 passes
|-
!acrylic
|
|1.5 mm
|cut
|30
|100
|
|
|
|
Line 50: Line 83:
!acrylic
!acrylic
|
|
|1.5 mm
|6 mm
|cut
|cut
|30
|30

Revision as of 21:27, 6 November 2024

Welcome to my page :^)

I am a new member of the comakingspace and new to most tools in the shop.

My current projects are learning to use Autodesk Fusion and the laser cutter.

When I have my materials and introduction to the machine, I already have a bunch of laser cutter projects on my todo list. I want to start small with a bunch of board game knick-knacks, drawer organisers, desk doodads and stationery accessories. Down the line I want to learn about 3D printing and create some basic ATLAS compatible drawer housings.

Always keen to collaborate in block printing projects :D

Materials

Material Date

(YYYY-MM)

Thickness Operation Speed (mm/s) Power (%) Corner power Scan gap ("resolution") Focus Comments
Plywood 3mm Bubinga (ROBOTIME) 3 mm cut 30 100 in focus kerf 0.1 mm
Plywood 3mm yellow Lime (ROBOTIME) 3 mm cut 30 100 in focus
Plywood 3mm yellow Lime (ROBOTIME) 3 mm bleech 500 20 in focus do NOT use masking tape
Plywood 3mm yellow Lime (ROBOTIME) 3 mm engraving 200 40 in focus DO use masking tape;
2 passes
acrylic 1.5 mm cut 30 100
acrylic 6 mm cut 30 100