Project:Makita Makpak Workbench and Toolholder: Difference between revisions
From CoMakingSpace Wiki
No edit summary |
No edit summary |
||
| Line 4: | Line 4: | ||
Dimensions: 400*300 | Dimensions: 400*300 | ||
[[File:MFT_file.png | [[File:MFT_file.png|CAD file of MFT workbench]] | ||
{{ProjectInfoBox | {{ProjectInfoBox | ||
| Line 37: | Line 37: | ||
}} | }} | ||
[[File:Toolholder.jpg | [[File:Toolholder.jpg|CAD file of toolinsert]] | ||
Revision as of 18:15, 29 December 2024
Worktop for Makita Makpac/MFT
The worktop is made from 18mm plywood and is fully compatible with the Makita Makpac system. The worktop is securely fixed in place using the four side latches of the toolbox. The MFT features a circumferential seam as well as a tray area and 20 mm Dogholes for clamps.
Dimensions: 400*300
| ProjectInfoBox MakPac MFT Workbench | |
|---|---|
| |
| Status: | unfinished |
| Release Date: | 12/2024 |
| Initiator: | TOm |
| Materials Used: | Plywood |
| Tools Used: | Tablesaw, Router, Workbee |
| Software Used: | Onshape |
| Approx. Cost: | 10€ for Plywood |
Tool Insert with Flexible Elastic Bands for Makita MakPac
Wooden lid insert with elastic bands for organizing tools in the Makita MakPac toolbox. Cut from 4mm beech Plywood. Dimensions: 227*345mm
| ProjectInfoBox ' | |
|---|---|
[[Has image::File: |frameless|300px]]
| |
| Status: | finished |
| Release Date: | 11/2024 |
| Initiator: | Tom |
| Materials Used: | 4mm beech Plywood |
| Tools Used: | Lasercutter |
| Software Used: | Onshape, incscape, Laser Software |
| Approx. Cost: | use scrap peace whatever you have lying around |
