User:MobiTobi: Difference between revisions
From CoMakingSpace Wiki
(update Robotime parameters) |
|||
| Line 78: | Line 78: | ||
| | | | ||
| | | | ||
| | |in focus | ||
| | | | ||
|- | |- | ||
| Line 89: | Line 89: | ||
| | | | ||
| | | | ||
| | |in focus | ||
| | | | ||
|- | |- | ||
|} | |} | ||
Revision as of 21:27, 6 November 2024
Welcome to my page :^)
I am a new member of the comakingspace and new to most tools in the shop.
My current projects are learning to use Autodesk Fusion and the laser cutter.
When I have my materials and introduction to the machine, I already have a bunch of laser cutter projects on my todo list. I want to start small with a bunch of board game knick-knacks, drawer organisers, desk doodads and stationery accessories. Down the line I want to learn about 3D printing and create some basic ATLAS compatible drawer housings.
Always keen to collaborate in block printing projects :D
Materials
| Material | Date
(YYYY-MM) |
Thickness | Operation | Speed (mm/s) | Power (%) | Corner power | Scan gap ("resolution") | Focus | Comments |
|---|---|---|---|---|---|---|---|---|---|
| Plywood 3mm Bubinga (ROBOTIME) | 3 mm | cut | 30 | 100 | in focus | kerf 0.1 mm | |||
| Plywood 3mm yellow Lime (ROBOTIME) | 3 mm | cut | 30 | 100 | in focus | ||||
| Plywood 3mm yellow Lime (ROBOTIME) | 3 mm | bleech | 500 | 20 | in focus | do NOT use masking tape | |||
| Plywood 3mm yellow Lime (ROBOTIME) | 3 mm | engraving | 200 | 40 | in focus | DO use masking tape; 2 passes | |||
| acrylic | 1.5 mm | cut | 30 | 100 | in focus | ||||
| acrylic | 6 mm | cut | 30 | 100 | in focus |
