User:MobiTobi: Difference between revisions
From CoMakingSpace Wiki
m (→Materials) |
(update Robotime parameters) |
||
Line 33: | Line 33: | ||
|100 | |100 | ||
| | | | ||
| | |||
|in focus | |||
|kerf 0.1 mm | |||
|- | |||
!Plywood 3mm yellow Lime (ROBOTIME) | |||
| | |||
|3 mm | |||
|cut | |||
|30 | |||
|100 | |||
| | | | ||
| | | | ||
|in focus | |||
| | | | ||
|- | |- | ||
Line 40: | Line 51: | ||
| | | | ||
|3 mm | |3 mm | ||
| | |bleech | ||
|500 | |||
|20 | |||
| | |||
| | |||
|in focus | |||
|do NOT use masking tape | |||
|- | |||
!Plywood 3mm yellow Lime (ROBOTIME) | |||
| | | | ||
|3 mm | |||
|engraving | |||
|200 | |||
|40 | |||
| | | | ||
| | |||
|in focus | |||
|DO use masking tape; <br> 2 passes | |||
|- | |||
!acrylic | |||
| | |||
|1.5 mm | |||
|cut | |||
|30 | |||
|100 | |||
| | | | ||
| | | | ||
Line 50: | Line 83: | ||
!acrylic | !acrylic | ||
| | | | ||
| | |6 mm | ||
|cut | |cut | ||
|30 | |30 |
Revision as of 21:27, 6 November 2024
Welcome to my page :^)
I am a new member of the comakingspace and new to most tools in the shop.
My current projects are learning to use Autodesk Fusion and the laser cutter.
When I have my materials and introduction to the machine, I already have a bunch of laser cutter projects on my todo list. I want to start small with a bunch of board game knick-knacks, drawer organisers, desk doodads and stationery accessories. Down the line I want to learn about 3D printing and create some basic ATLAS compatible drawer housings.
Always keen to collaborate in block printing projects :D
Materials
Material | Date
(YYYY-MM) |
Thickness | Operation | Speed (mm/s) | Power (%) | Corner power | Scan gap ("resolution") | Focus | Comments |
---|---|---|---|---|---|---|---|---|---|
Plywood 3mm Bubinga (ROBOTIME) | 3 mm | cut | 30 | 100 | in focus | kerf 0.1 mm | |||
Plywood 3mm yellow Lime (ROBOTIME) | 3 mm | cut | 30 | 100 | in focus | ||||
Plywood 3mm yellow Lime (ROBOTIME) | 3 mm | bleech | 500 | 20 | in focus | do NOT use masking tape | |||
Plywood 3mm yellow Lime (ROBOTIME) | 3 mm | engraving | 200 | 40 | in focus | DO use masking tape; 2 passes | |||
acrylic | 1.5 mm | cut | 30 | 100 | |||||
acrylic | 6 mm | cut | 30 | 100 |