User:MobiTobi: Difference between revisions
From CoMakingSpace Wiki
m (→Materials) |
|||
| (2 intermediate revisions by the same user not shown) | |||
| Line 9: | Line 9: | ||
Always keen to collaborate in block printing projects :D | Always keen to collaborate in block printing projects :D | ||
Currently I am working on a [[collapsible_designs | guide]] on how-to design collapsible designs using slot and tab joints. | |||
== Materials == | == Materials == | ||
| Line 111: | Line 113: | ||
| | | | ||
| | | | ||
|- | |<nowiki>- 1mm</nowiki> | ||
| | |||
|- | |||
!PE Foam for LEDs | |||
|2024-11 | |||
|2 mm | |||
|cut | |||
|? | |||
|? | |||
| | |||
| | |||
| surface | |||
| | |||
|- | |||
!PE Foam high density | |||
|2024-11 | |||
|2 mm | |||
|cut | |||
|? | |||
|? | |||
| | |||
| | |||
| surface | |||
| | | | ||
|- | |- | ||
|} | |} | ||
Latest revision as of 19:16, 6 December 2024
Welcome to my page :^)
I am a new member of the comakingspace and new to most tools in the shop.
My current projects are learning to use Autodesk Fusion and the laser cutter.
When I have my materials and introduction to the machine, I already have a bunch of laser cutter projects on my todo list. I want to start small with a bunch of board game knick-knacks, drawer organisers, desk doodads and stationery accessories. Down the line I want to learn about 3D printing and create some basic ATLAS compatible drawer housings.
Always keen to collaborate in block printing projects :D
Currently I am working on a guide on how-to design collapsible designs using slot and tab joints.
Materials
| Material | Date
(YYYY-MM) |
Thickness | Operation | Speed (mm/s) | Power (%) | Corner power | Scan gap ("resolution") | Focus | Comments |
|---|---|---|---|---|---|---|---|---|---|
| Plywood 3mm Bubinga (ROBOTIME) | 2024-10 | 3 mm | cut | 26 | 100 | surface | kerf 0.1 mm | ||
| Plywood 3mm yellow Lime (ROBOTIME) | 2024-10 | 3 mm | cut | 26 | 100 | surface | |||
| Plywood 3mm yellow Lime (ROBOTIME) | 2024-10 | 3 mm | bleech | 500 | 20 | surface | do NOT use masking tape | ||
| Plywood 3mm yellow Lime (ROBOTIME) | 2024-10 | 3 mm | engraving | 200 | 40 | surface | DO use masking tape; 2 passes | ||
| PMMA (acrylic glass) extruded | 2024-11 | 3 mm | cut | 35 | 100 | surface | kerf:0.1 mm | ||
| PMMA (acrylic glass) extruded | 2024-11 | 3 mm | cut | 45 | 100 | surface | kerf: 0.06 mm | ||
| PMMA (acrylic glass) extruded | 2024-11 | 6 mm | cut | 6 | 100 | surface | visible difference between top and bottom edge; at speed 4 and 8 cutting edges looked less clean | ||
| PMMA (acrylic glass) extruded white | 2024-11 | 3 mm | cut | 20 | 100 | - 1mm | |||
| PE Foam for LEDs | 2024-11 | 2 mm | cut | ? | ? | surface | |||
| PE Foam high density | 2024-11 | 2 mm | cut | ? | ? | surface |
