Milling Experiences: Difference between revisions
From CoMakingSpace Wiki
(added PC) |
(→Materials and Tools: added plunge rate to PC) |
||
| Line 92: | Line 92: | ||
| 900 mm/min | | 900 mm/min | ||
| 0.8 mm | | 0.8 mm | ||
| | | 660 mm/min | ||
| quite good | | quite good | ||
| | | | ||
Revision as of 01:18, 22 March 2018
Materials and Tools
| material | operation | mill | spindle speed | feedrate | pass depth | plunge rate | results | comments | |
|---|---|---|---|---|---|---|---|---|---|
| black MDF, 19mm (Bauhaus) | 2D contour | 8 mm flat endmill, Z=2 (Sorotec UNI) | 1 | 2000 mm/min | 3 mm | excellent |
| ||
| MDF, 19mm (Bauhaus) | 2D contour | 8 mm flat endmill, Z=3 (cheap "VHM") | 3-4 | 1000 mm/min | 2 mm | terrible |
| ||
| black MDF, 19mm (Valchromat) | pocket clearing | 8 mm flat endmill, Z=2 (Sorotec UNI) | 1 | 2000 mm/min | 3 mm | excellent | |||
| black MDF, 19mm (Valchromat) | 2D chamfer | 8 mm chamfer mill, Z=4 | 1 | 2000 mm/min | excellent | ||||
| black MDF, 19mm (Bauhaus) | pocket operation | 1 mm flat endmill | 1 | 400 mm/min | 2 mm | excellent | |||
| acrylic glass, 10mm | pocket operation | 3 mm flat endmill, 4 flute | 1.5 | 660 mm/min | 0.4 mm | quite good |
| ||
| MDF, 5mm (Bauhaus) | drilling holes, pocket | 1/4 inch Kyocera 1620 - 2500.500 flat endmill, 2 flute | 1 (16000 RPM) | 1000 mm/min | 2.5mm | 333 mm/min | |||
| Polycarbonate, 10mm | pocket operation & contur | 3 mm flat endmill, 4 flute | 1.5 | 900 mm/min | 0.8 mm | 660 mm/min | quite good |
