Milling Experiences: Difference between revisions
From CoMakingSpace Wiki
(added Acrylic) |
|||
| Line 74: | Line 74: | ||
| | | | ||
| quite good | | quite good | ||
| * bottom a little rough | | | ||
* bottom a little rough | |||
|- | |||
| [[MDF]], 5mm (Bauhaus) | |||
| drilling holes, pocket | |||
| 1/4 inch [https://octopart.com/1620-2500.500-avx+%2F+kyocera-84247055 Kyocera 1620 - 2500.500] flat endmill, 2 flute | |||
| 1 ([https://discuss.inventables.com/t/spindel-speed-on-a-dewalt-611/37790/3 16000 RPM]) | |||
| 1000 mm/min | |||
| 2.5mm | |||
| 333 mm/min | |||
| | |||
| | |||
|} | |} | ||
[[Category:CNC]] | [[Category:CNC]] | ||
[[Category:Woodworking]] | [[Category:Woodworking]] | ||
Revision as of 20:37, 20 March 2018
Materials and Tools
| material | operation | mill | spindle speed | feedrate | pass depth | plunge rate | results | comments |
|---|---|---|---|---|---|---|---|---|
| black MDF, 19mm (Bauhaus) | 2D contour | 8 mm flat endmill, Z=2 (Sorotec UNI) | 1 | 2000 mm/min | 3 mm | excellent |
| |
| MDF, 19mm (Bauhaus) | 2D contour | 8 mm flat endmill, Z=3 (cheap "VHM") | 3-4 | 1000 mm/min | 2 mm | terrible |
| |
| black MDF, 19mm (Valchromat) | pocket clearing | 8 mm flat endmill, Z=2 (Sorotec UNI) | 1 | 2000 mm/min | 3 mm | excellent | ||
| black MDF, 19mm (Valchromat) | 2D chamfer | 8 mm chamfer mill, Z=4 | 1 | 2000 mm/min | excellent | |||
| black MDF, 19mm (Bauhaus) | pocket operation | 1 mm flat endmill | 1 | 400 mm/min | 2 mm | excellent | ||
| acrylic glass, 10mm | pocket operation | 3 mm flat endmill, 4 flute | 1.5 | 660 mm/min | 0.4 mm | quite good |
| |
| MDF, 5mm (Bauhaus) | drilling holes, pocket | 1/4 inch Kyocera 1620 - 2500.500 flat endmill, 2 flute | 1 (16000 RPM) | 1000 mm/min | 2.5mm | 333 mm/min |
