Project:Makita Makpak Workbench and Toolholder: Difference between revisions

Revision as of 18:16, 29 December 2024

Worktop for Makita Makpac/MFT

The worktop is made from 18mm plywood and is fully compatible with the Makita Makpac system. The worktop is securely fixed in place using the four side latches of the toolbox. The MFT features a circumferential seam as well as a tray area and 20 mm Dogholes for clamps. Dimensions: 400*300

ProjectInfoBox MakPac MFT Workbench

Status:	unfinished
Release Date:	12/2024
Initiator:	TOm
Materials Used:	Plywood
Tools Used:	Tablesaw, Router, Workbee
Software Used:	Onshape
Approx. Cost:	10€ for Plywood

Tool Insert with Flexible Elastic Bands for Makita MakPac

Wooden lid insert with elastic bands for organizing tools in the Makita MakPac toolbox. Cut from 4mm beech Plywood. Dimensions: 227*345mm

ProjectInfoBox '
[[Has image::File:\|frameless\|300px]]
Status:	finished
Release Date:	11/2024
Initiator:	Tom
Materials Used:	4mm beech Plywood
Tools Used:	Lasercutter
Software Used:	Onshape, incscape, Laser Software
Approx. Cost:	use scrap peace whatever you have lying around

CAD file of toolinsert

@@ Line 1: / Line 1: @@
 === Worktop for Makita Makpac/MFT ===
-The worktop is made from 18mm plywood and is fully compatible with the Makita Makpac system. The worktop is securely fixed in place using the four side latches of the toolbox. The MFT features a circumferential seam as well as a tray area and 20 mm Dogholes for clamps.
+The worktop is made from 18mm plywood and is fully compatible with the Makita Makpac system. The worktop is securely fixed in place using the four side latches of the toolbox. The MFT features a circumferential seam as well as a tray area and 20 mm Dogholes for clamps. Dimensions: 400*300
-Dimensions: 400*300
-[[File:MFT_file.png|CAD file of MFT workbench]]
 {{ProjectInfoBox
@@ Line 18: / Line 14: @@
 |cost= 10€ for Plywood
 }}
+[[File:MFT_file.png|CAD file of MFT workbench]]