Project:Ultimate Frisbee Clips: Difference between revisions
From CoMakingSpace Wiki
No edit summary |
No edit summary |
||
| Line 5: | Line 5: | ||
I was lazy and didnt design my own clips. Instead I have used 2 different designs I found on thingiverse. | I was lazy and didnt design my own clips. Instead I have used 2 different designs I found on thingiverse. | ||
link=[https://www.thingiverse.com/thing:5030934 ] | |||
link=[https://www.thingiverse.com/thing:3889169] | |||
I ended up liking Design 1 more than Design 2. | I ended up liking Design 1 more than Design 2. | ||
Revision as of 13:03, 1 November 2023
Someone on a team I used to play for had one of these clips to keep a disc on the outside of their bag when we were on a trip and I finally have the opportunity to print my own.
It is useful because it is very easy to 'warp' o bend a disc when you are (over)packing a bag to travel with.
I was lazy and didnt design my own clips. Instead I have used 2 different designs I found on thingiverse.
link=[1]
link=[2]
I ended up liking Design 1 more than Design 2. The only issuse I had was tha tthe hole for the keyring didnt fit the keyring I had. I printed it again scaled up to 110% and with the 0.4mm nozzle instead of the 0.8mm. The result was much better for what I wanted.
No clearance
Holding a disc
More clearance
