Wood Lathes: Difference between revisions

From CoMakingSpace Wiki

(Printed the qr code)
(→‎Upgrades/Improvements: yesterday's fixes, Micha's accessories don't fit; todo disc sander)
Line 44: Line 44:
=== Upgrades/Improvements ===
=== Upgrades/Improvements ===
We should soon tweak this machine to improve usability (also see [https://github.com/comakingspace/do-something/issues/7 issue #7]) :
We should soon tweak this machine to improve usability (also see [https://github.com/comakingspace/do-something/issues/7 issue #7]) :
* replace pulley adjustment and casing screws by thumbwheels or so
* [[weld]] two spots onto the tailstock screw so it doesn't turn past its intended blocker anymore (gap was too wide) ✔
* add a clamping lever to the tool rest's nut
* <strike>add a clamping lever to the tool rest's nut</strike> switch nuts between tool rest (should have lever for quick change) and tailstock (OK to require tools) ✔
* <strike>buy (or turn on the [[Metal Lathe|metal lathe]]) an [https://drechslershop.de/drechselfutter-mitnehmer-planscheiben/adapter/adapter-m-33-din-800m-18-x-25.html 18 to 33 mm adapter] (to match common accessories like faceplates)
** levers on both nuts could block each other
* buy (or make) a faceplate</strike> ''Micha brought in enough accessories for the start :-)''
* buy (or turn on the [[Metal Lathe|metal lathe]]) an [https://drechslershop.de/drechselfutter-mitnehmer-planscheiben/adapter/adapter-m-33-din-800m-18-x-25.html 18 to 33 mm adapter] (to match common accessories like faceplates)
* buy (or make) a faceplate
* make a lathe-powered [[Disc Sander|disc sander]]


<br clear="all"/>
<br clear="all"/>

Revision as of 07:52, 11 May 2019

MachineInfoBox

Wood Lathes

Machine-default.png
Synonyms: woodturning lathes; DE: Drechselbänke,
Drechselmaschinen
Type: [[lathe]]
Material: woodturning blanks
Used with: face shield, woodturning tools
Location: wood workshop
Access Requirements: Woodturning IntroductionThe part "]]" of the query was not understood.</br>Results might not be as expected.
Tutors: LukasThe part "]]" of the query was not understood.</br>Results might not be as expected.
Similar (More or Less): metal lathe

[[Has caption::lathe| ]] [[MachineType::lathe| ]]


We have wood lathes in the wood workshop that can be used as an entry to woodturning - once a community of turning enthusiasts develops and the machines become too weak for more ambitious projects, we can think about replacing them with a professional model.


Güde 1000

MachineInfoBox

Güde 1000

Güde Drechselbank uninstalled.JPG
Type: [[lathe]]
Material: woodturning blanks
Used with: face shield, woodturning tools
Location: wood workshop
Access Requirements: Woodturning IntroductionThe part "]]" of the query was not understood.</br>Results might not be as expected.
Status: [[Has InfoBox Status::needs some upgrades to the tool rest]]
Manual: Guede.com
Tutors: LukasThe part "]]" of the query was not understood.</br>Results might not be as expected.

[[Has caption::lathe| ]] [[MachineType::lathe| ]]


The "Güde" wood lathe is very simple, but okay for learning how to turn wood.

Specs

  • max. workpiece diameter: 320 mm
  • max. workpiece length: 1000 mm
  • spindle speeds: 850 - 1250 - 1750 - 2510 rpm
  • motor: 370 W
  • spindle thread: M18
  • workholding options: drive center (Vielzack-Stirnmitnehmer/"Dornenkrone"), four-jaw chuck, faceplate (wrong thread)

Speed Selection

The lathe can run at various speeds depending on which pulleys are connected by the belt (picture on the housing). Do not put excessive tension on the belt - you'll be very happy about the belt slipping in case you've made a mistake and the tool digs into the workpiece!

Upgrades/Improvements

We should soon tweak this machine to improve usability (also see issue #7) :

  • weld two spots onto the tailstock screw so it doesn't turn past its intended blocker anymore (gap was too wide) ✔
  • add a clamping lever to the tool rest's nut switch nuts between tool rest (should have lever for quick change) and tailstock (OK to require tools) ✔
    • levers on both nuts could block each other
  • buy (or turn on the metal lathe) an 18 to 33 mm adapter (to match common accessories like faceplates)
  • buy (or make) a faceplate
  • make a lathe-powered disc sander


Holzmann D 460F

MachineInfoBox

Holzmann D 460F

Holzmann D460F.jpg
Type: [[lathe]]
Material: woodturning blanks
Used with: face shield, woodturning tools
Location: wood workshop
Access Requirements: Woodturning IntroductionThe part "]]" of the query was not understood.</br>Results might not be as expected.
Status: operational
Manual: maschinenhandel-gronau.de (DE)
Tutors: LukasThe part "]]" of the query was not understood.</br>Results might not be as expected.

[[Has caption::lathe| ]] [[MachineType::lathe| ]]



SAFETY NOTE: Make sure you lock the box with the on/off switch in place before use! DO NOT start the lathe when it can swivel, you may not be able to safely turn it off then and the belt/pulleys are exposed!

Specs

this lathe can be used with a drill chuck!
  • max. workpiece diameter: 254 mm
  • max. workpiece length: 450 mm
  • spindle speeds: 650-3800 rpm (variable)
  • motor: 370 W
  • spindle thread: M33
  • workholding options:
    • headstock: four-jaw chuck
    • tailstock: morse taper - accessories: rotating center, drill chuck

Speed Selection

The D 460F has an electronic speed selection which is regulated by a potentiometer (without scale!) above the on/off switch.

Upgrades/Improvements

Ideas:

  • it would be nice to fix the control box more properly - this should be coordinated with Micha Ba. who is the machine's owner!
  • get/make a faceplate and a drive center for more workholding flexibility

Further Reading