Wood Lathes: Difference between revisions

From CoMakingSpace Wiki

(new lathe commissioning)
m (Trying to get rid of the extra "Wood Lathe")
 
(11 intermediate revisions by 2 users not shown)
Line 1: Line 1:
{{MachineInfoBox
{{MachineInfoBox
|machine name=Wood Lathes
|machine name=Wood Lathes
|image=Wood_Lathe_Example.mp4
|image=woodturning - notches by skew chisel.gif
|synonyms=woodturning lathes; DE: Drechselbänke,<br>Drechselmaschinen
|synonyms=woodturning lathes; DE: Drechselbänke,<br>Drechselmaschinen
|type=[[lathe]]
|material=[[Woodturning Blanks|woodturning blanks]]
|material=[[Woodturning Blanks|woodturning blanks]]
|location=[[Location::Wood Workshop|wood workshop]]
|location=[[Location::Woodturning Area|woodturning area]]
|access=[[Woodturning Introduction]]
|tutors=[[Tutor::User:Lukas|Lukas]]
|used with=[[Face Shield|face shield]], [[Woodturning Tools|woodturning tools]]
|used with=[[Face Shield|face shield]], [[Woodturning Tools|woodturning tools]]
|similar=[[Metal Lathe|metal lathe]]
|similar=[[Metal Lathe|metal lathe]]
Line 17: Line 14:


<br clear="all"/>
<br clear="all"/>
==Güde 1000==
<!--  NOTE: The following block "imports" content from separate pages - please don't change the code! To edit the actual information, please go back and click "edit" next to the section headline you are interested in :-)  -->
{{MachineInfoBox
{{#ask:[[MachineType::Wood Lathe]]
|machine name=Güde 1000
|order=descending
|german=Drechselbänke
|format=embedded
|image=Güde 1000.JPG
|embedonly=yes
|type=[[lathe]]
|material=[[Woodturning Blanks|woodturning blanks]]
|location=[[Wood Workshop|wood workshop]]
|access=[[Woodturning Introduction]]
|status=functional<br>([https://github.com/comakingspace/do-something/issues/7 needs some more documentation])
|manual=[https://www.guede.com/sys/dl/00501_ml.pdf Guede.com]
|tutors=[[Lukas]]
|used with=[[Face Shield|face shield]], [[Woodturning Tools|woodturning tools]]
}}
}}
The "Güde" wood lathe is very simple, but okay for learning how to turn wood.
=== Caution - Overheats Old Fuses ===
This lathe may trip an old-fashioned fuse (circuit breaker, ''Sicherung'') when turned off an on repeatedly as every start of the motor draws a lot of power. To prevent this issue, plug the lathe into the "modern" black/white outlet box below the main power ''Verteiler'' to the right of the lathe! Please ask a [[tutor]] or [[manager]] if you're not sure about any of this.
=== Specs ===
* max. workpiece diameter: 320 mm
* max. workpiece length: 1000 mm
* spindle speeds: 850 - 1250 - 1750 - 2510 rpm
* motor: 370 W
* spindle thread: M18
* workholding options: drive center (''Vielzack-Stirnmitnehmer/"Dornenkrone"''), <strike>four-jaw chuck, faceplate</strike> (wrong thread)
=== Speed Selection ===
The lathe can run at various speeds depending on which pulleys are connected by the belt (picture on the housing). '''Do not put excessive tension on the belt - you'll be very happy about the belt slipping in case you've made a mistake and the tool digs into the workpiece!'''
=== Upgrades/Improvements ===
We have tweaked this machine to improve usability (also see [https://github.com/comakingspace/do-something/issues/7 issue #7]) :
* [[Johannes]] and [[Lukas]] [[weld]]ed two spots onto the tailstock screw so it doesn't turn past its intended blocker anymore (gap was too wide)
* [[Patrick]] made the tool rest rock solid by removing the grub screw that pressed against the vertical rod and drilling a threaded hole into the rod instead
* [[Lukas]] is [https://github.com/comakingspace/do-something/issues/119 working on a lathe-mounted disc sander]
In addition, these accessories might be interesting in the future:
* buy (or turn on the [[Metal Lathe|metal lathe]]) an [https://drechslershop.de/drechselfutter-mitnehmer-planscheiben/adapter/adapter-m-33-din-800m-18-x-25.html 18 to 33 mm adapter] (to match commonly sold accessories like faceplates)
* buy (or make) a faceplate
** can be made like the plate of the [[Disc Sander|disc sander]] (just much smaller)
** [https://turnawoodbowl.com/wood-lathe-faceplate-never-do-this-8-things/ "8 things not to do with faceplates"] - sizing, attaching etc
<br clear="all"/>
== Holzmann D 460F ==
{{MachineInfoBox
|machine name=Holzmann D 460F
|image=Holzmann D460F.jpg
|type=[[lathe]]
|material=[[Woodturning Blanks|woodturning blanks]]
|location=[[Location::Wood Workshop|wood workshop]]
|access=[[Woodturning Introduction]]
|status=operational
|manual=''[http://download.maschinenhandel-gronau.de/MANUAL_D_460_460F_DE.pdf maschinenhandel-gronau.de (DE)]''
|tutors=[[Lukas]]
|used with=[[Face Shield|face shield]], [[Woodturning Tools|woodturning tools]]
|extrabox=yes}}
SAFETY NOTE: Make sure you lock the box with the on/off switch in place before use! DO NOT start the lathe when it can swivel, you may not be able to safely turn it off then and the belt/pulleys are exposed!
=== Specs ===
[[File:toy wheel turning 6.JPG|thumb|right|250 px|this lathe can be used with a drill chuck!]]
* max. workpiece diameter: 254 mm
* max. workpiece length: 450 mm
* spindle speeds: 650-3800 rpm (variable)
* motor: 370 W
* spindle thread: M33
* workholding options:
** headstock: four-jaw chuck
** tailstock: morse taper - accessories: rotating center, drill chuck
=== Speed Selection ===
The D 460F has an electronic speed selection which is regulated by a potentiometer (without scale!) above the on/off switch.
=== Upgrades/Improvements ===
Ideas:
* it would be nice to fix the control box more properly - this should be coordinated with Micha Ba. who is the machine's owner!
* get/make a faceplate and a drive center for more workholding flexibility
== Tyme Avon ==
{{Commissioning
|IssueNumber=
|Naming=
|NamingComment=Tyme Avon
|Picture=
|PictureComment=
|Manual=
|ManualComment=print version for sale (expensive) [http://www.lathes.co.uk/tyme/ here]
|Documentation=
|DocumentationComment=explain (& photograph?) all major accessories and setup options; possible starting point besides manual: http://www.lathes.co.uk/tyme/
|QR=
|QRComment=
|Introduction=
|IntroductionComment=[[Woodturning Introduction]] may need slight changes - TBD
|Security=
|SecurityComment=needs EU plug - and also a longer cord while we're at it?; belt runs into the side of its pulleys -> shim the motor to move it out approx. 1 mm?
|Test=
|TestComment=
|OwnerValue=
|OwnerValueComment=donated by Joe; value not yet known
|Availability=
|AvailabilityComment=
}}


== Further Reading ==
== Further Reading ==
Line 132: Line 29:
** [https://www.thespruce.com/buy-and-use-a-wood-lathe-3536927 Tips for Buying and Using a Wood Lathe]  
** [https://www.thespruce.com/buy-and-use-a-wood-lathe-3536927 Tips for Buying and Using a Wood Lathe]  
* [http://www.docgreenwoodturner.com/index.html Doc Green Woodturner]
* [http://www.docgreenwoodturner.com/index.html Doc Green Woodturner]
[[Category:Woodturning]]
[[Category:Woodturning]]

Latest revision as of 13:32, 20 October 2022

MachineInfoBox

Wood Lathes

Woodturning - notches by skew chisel.gif
Synonyms: woodturning lathes; DE: Drechselbänke,
Drechselmaschinen
Material: woodturning blanks
Used with: face shield, woodturning tools
Location: woodturning area
Access Requirements: Woodturning Introduction
Tutors: Lukas
Similar (More or Less): metal lathe


We have wood lathes in the wood workshop that can be used as an entry to woodturning - once a community of turning enthusiasts develops and the machines become too weak for more ambitious projects, we can think about replacing them with a professional model.


Tyme Avon

MachineInfoBox

Tyme Avon ATL301

Tyme Avon ATL301.jpg
Type: Wood Lathe
Material: woodturning blanks
Used with: face shield, woodturning tools
Location: woodturning area
Access Requirements: Woodturning Introduction
Status: [[Has InfoBox Status::accessories need documentation]]
Tutors: Lukas




The Tyme Avon is an old, but solidly built lathe that has replaced our flimsy Güde 1000.

Specs

We seem to have the Model ATL301 with 36" (915 mm) between centers and a bed length of 52" (1320 mm).

  • max. workpiece diameter (above bed): 280 mm (11")
    • max. workpiece diameter (swiveled 90°): 495 mm (19.5")
    • max. workpiece diameter (swiveled 180°): 610 mm (24")
  • max. workpiece length: 900 mm
  • spindle speeds: 470 - 750 - 1150 - 2000 rpm
  • motor: 550 W (3/4 hp)
  • spindle thread: M25 × 2 mm; internal No. 2 morse taper (MK2)
  • workholding options:
    • headstock: drive center, faceplate, four-jaw chuck, ...
    • tailstock: No. 2 morse taper (MK2) - accessories: rotating centers, our "usual" drill chucks also fit

Speed Selection

The lathe can run at various speeds depending on which pulleys are connected by the belt:

spindle speeds resulting from each belt position

Do not put excessive tension on the belt - you'll be very happy about the belt slipping in case you've made a mistake and the tool digs into the workpiece!

New belts are still sold at store.lathes.co.uk


Accessories

Click the photos below for more information!

Spare Parts

Many spare parts can be found via incamachines.com.

The current driving belt is labeled with "190J6 TBA POLY-V 483J6" and "2088".

Holzmann D 460F

MachineInfoBox

Holzmann D 460F

Holzmann D460F.jpg
Type: Wood Lathe
Material: woodturning blanks
Used with: face shield, woodturning tools
Location: woodturning area
Access Requirements: Woodturning Introduction
Status: operational
Manual: maschinenhandel-gronau.de (DE)
Tutors: Lukas




SAFETY NOTE: Make sure you lock the box with the on/off switch in place before use! DO NOT start the lathe when it can swivel, you may not be able to safely turn it off then and the belt/pulleys are exposed!

Specs

this lathe can be used with a drill chuck!
  • max. workpiece diameter: 254 mm
  • max. workpiece length: 450 mm
  • spindle speeds: 650-3800 rpm (variable)
  • motor: 370 W
  • spindle thread: M33
  • workholding options:
    • headstock: four-jaw chuck
    • tailstock: morse taper - accessories: rotating center, drill chuck

Speed Selection

The D 460F has an electronic speed selection which is regulated by a potentiometer (without scale!) above the on/off switch.

Upgrades/Improvements

Ideas:

  • it would be nice to fix the control box more properly - this should be coordinated with Micha Ba. who is the machine's owner!
  • get/make a faceplate and a drive center for more workholding flexibility

Accessories

Click the photos below for more information!


Further Reading