Wood Lathes: Difference between revisions
From CoMakingSpace Wiki
m (aka Drechselmaschine, minor progress update) |
(update - pretty much usable now!) |
||
| Line 6: | Line 6: | ||
|material=[[wood]] | |material=[[wood]] | ||
|location=[[Wood Workshop|wood workshop]] | |location=[[Wood Workshop|wood workshop]] | ||
|access= | |access=upon [[Woodturning Introduction|personal introduction]] | ||
|status=just arrived, [https://github.com/comakingspace/do-something/issues/7 needs some care] | |status=just arrived, [https://github.com/comakingspace/do-something/issues/7 needs some care] | ||
|firmware= | |firmware= | ||
| Line 15: | Line 15: | ||
|similar=[[Metal Lathe|metal lathe]] | |similar=[[Metal Lathe|metal lathe]] | ||
}} | }} | ||
We have a simple wood lathe in the [[Wood Workshop|wood workshop]] that we can use as an entry to [[woodturning]] - if a community of turning enthusiasts develops and the machine becomes too weak for more ambitious projects, we'll have to think about replacing it with a professional model. | |||
== Specs == | == Specs == | ||
| Line 30: | Line 23: | ||
* motor: 370 W | * motor: 370 W | ||
* spindle thread: M18 | * spindle thread: M18 | ||
* | * workholding options: drive center (''Vielzack-Stirnmitnehmer/"Dornenkrone"''), four-jaw chuck, faceplate | ||
== Belt Tensioning == | == Belt Tensioning == | ||
| Line 38: | Line 31: | ||
We should soon tweak this machine to improve usability: | We should soon tweak this machine to improve usability: | ||
* replace pulley adjustment and casing screws by thumbwheels or so | * replace pulley adjustment and casing screws by thumbwheels or so | ||
* buy (or turn on the [[Metal Lathe|metal lathe]]) an [https://drechslershop.de/drechselfutter-mitnehmer-planscheiben/adapter/adapter-m-33-din-800m-18-x-25.html 18 to 33 mm adapter] (to match common accessories like faceplates) | * add a clamping lever to the tool rest's nut | ||
* buy (or make) a faceplate | * <strike>buy (or turn on the [[Metal Lathe|metal lathe]]) an [https://drechslershop.de/drechselfutter-mitnehmer-planscheiben/adapter/adapter-m-33-din-800m-18-x-25.html 18 to 33 mm adapter] (to match common accessories like faceplates) | ||
* buy (or make) a faceplate</strike> ''Micha brought in enough accessories for the start :-)'' | |||
== Further Reading == | == Further Reading == | ||
Revision as of 19:37, 3 August 2018
| MachineInfoBox Güde 1000 | |
|---|---|
| |
| Synonyms: | woodturning lathe; DE: Drechselbank, Drechselmaschine |
| Type: | [[lathe]] |
| Material: | wood |
| Used with: | face shield, woodturning tools |
| Location: | wood workshop |
| Access Requirements: | Woodturning IntroductionThe part "]]" of the query was not understood.</br>Results might not be as expected. |
| Status: | [[Has InfoBox Status::just arrived, needs some care]] |
| Manual: | Guede.com |
| Tutors: | LukasThe part "]]" of the query was not understood.</br>Results might not be as expected. |
| Similar (More or Less): | metal lathe |
[[Has caption::lathe| ]] [[MachineType::lathe| ]]
We have a simple wood lathe in the wood workshop that we can use as an entry to woodturning - if a community of turning enthusiasts develops and the machine becomes too weak for more ambitious projects, we'll have to think about replacing it with a professional model.
Specs
- max. workpiece diameter: 320 mm
- max. workpiece length: 1000 mm
- spindle speeds: 850 - 1250 - 1750 - 2510 rpm
- motor: 370 W
- spindle thread: M18
- workholding options: drive center (Vielzack-Stirnmitnehmer/"Dornenkrone"), four-jaw chuck, faceplate
Belt Tensioning
The lathe can run at various speeds depending on which pulleys are connected by the belt (picture on the housing). Do not put excessive tension on the belt - you'll be very happy about the belt slipping in case you've made a mistake and the tool digs into the workpiece!
Upgrades/Improvements
We should soon tweak this machine to improve usability:
- replace pulley adjustment and casing screws by thumbwheels or so
- add a clamping lever to the tool rest's nut
buy (or turn on the metal lathe) an 18 to 33 mm adapter (to match common accessories like faceplates)buy (or make) a faceplateMicha brought in enough accessories for the start :-)
