User:Lukas/Werkzeug: Difference between revisions

From CoMakingSpace Wiki
(Stechbeitel)
m (→‎Hobel: JUUMA-Anleitung)
(28 intermediate revisions by the same user not shown)
Line 1: Line 1:
''"private" Seite mit einigen Werkzeugen aus meiner persönlichen Sammlung - Ausleihen tendenziell möglich, einfach fragen!''  
''"private" Seite mit einigen Werkzeugen aus meiner persönlichen Sammlung - Ausleihen tendenziell möglich, einfach fragen!''  


== Japansägen ==
== 3D-Drucker ==
Prusa i3 Acrylic (ähnlich "Anet A8"), soll [https://reprap.org/wiki/Diamond_Hotend Diamond Hotend] bekommen und lief deshalb noch nie...
* 2016: "Rumba"-Boards von reprap.me funktionierten 3x(!) nicht und der Kundenservice wurde bei jeder Reklamation schlechter
* neuer Versuch 2020: [https://smile.amazon.de/dp/B07CT9VMSV/ BIQU Tango] via Amazon
** [https://www.thingiverse.com/thing:3370956 Tutorial für ähnliches Setup auf Thingiverse]
 
== Arbeitsschutz ==
* Halbmaske: Dräger X-plore 3500
** Filter "Pure P3 R"; Größe L
 
== Bits ==
=== graues Set ===
''nicht mehr ganz vollständig, v. a. security Torx; manche im Forum-Set''
{| class="wikitable sortable mw-collapsible mw-collapsed"
|-
! scope="col"| Size
! scope="col"| Screw Symbol
! scope="col"| Screw Type
! scope="col"| Notes   
|-
! scope="row"| PH0
| [[File:Screw Head - Phillips.svg|frameless|20px|center]]
| Phillips
| 2x short
|-
! scope="row"| PH1
| [[File:Screw Head - Phillips.svg|frameless|20px|center]]
| Phillips
| 3x short, 2x long
|-
! scope="row"| PH2
| [[File:Screw Head - Phillips.svg|frameless|20px|center]]
| Phillips
| 2x short
|-
! scope="row"| PH3
| [[File:Screw Head - Phillips.svg|frameless|20px|center]]
| Phillips
| 7x short, 2x long
|-
! scope="row"| PZ0
| [[File:Screw Head - Pozidrive.svg|frameless|20px|center]]
| Pozidriv
| 1x short
|-
! scope="row"| PZ1
| [[File:Screw Head - Pozidrive.svg|frameless|20px|center]]
| Pozidriv
| 4x short
|-
! scope="row"| PZ2
| [[File:Screw Head - Pozidrive.svg|frameless|20px|center]]
| Pozidriv
| 10x short, 1x long
|-
! scope="row"| PZ3
| [[File:Screw Head - Pozidrive.svg|frameless|20px|center]]
| Pozidriv
| 2x short, 1x long
|-
! scope="row"| 4 mm
| [[File:Screw Head - Slotted.svg|frameless|20px|center]]
| slotted
| 1x long
|-
! scope="row"| 4.5 mm
| [[File:Screw Head - Slotted.svg|frameless|20px|center]]
| slotted
| 1x short
|-
! scope="row"| 5 mm
| [[File:Screw Head - Slotted.svg|frameless|20px|center]]
| slotted
| 1x long
|-
! scope="row"| 5.5 mm
| [[File:Screw Head - Slotted.svg|frameless|20px|center]]
| slotted
| 1x short
|-
! scope="row"| 6 mm
| [[File:Screw Head - Slotted.svg|frameless|20px|center]]
| slotted
| 1x long
|-
! scope="row"| 6.5 mm
| [[File:Screw Head - Slotted.svg|frameless|20px|center]]
| slotted
| 1x short
|-
! scope="row"| 7 mm
| [[File:Screw Head - Slotted.svg|frameless|20px|center]]
| slotted
| 1x long
|-
! scope="row"| T8
| [[File:Screw Head - Torx.svg|frameless|20px|center]]
| Torx
| 1x short
|-
! scope="row"| T10
| [[File:Screw Head - Torx.svg|frameless|20px|center]]
| Torx
| 2x short, 1x long
|-
! scope="row"| T15
| [[File:Screw Head - Torx.svg|frameless|20px|center]]
| Torx
| 2x short
|-
! scope="row"| T20
| [[File:Screw Head - Torx.svg|frameless|20px|center]]
| Torx
| 2x short, 1x long
|-
! scope="row"| T25
| [[File:Screw Head - Torx.svg|frameless|20px|center]]
| Torx
| 2x short
|-
! scope="row"| T27
| [[File:Screw Head - Torx.svg|frameless|20px|center]]
| Torx
| 1x short
|-
! scope="row"| T30
| [[File:Screw Head - Torx.svg|frameless|20px|center]]
| Torx
| 2x short, 1x long
|-
! scope="row"| T40
| [[File:Screw Head - Torx.svg|frameless|20px|center]]
| Torx
| 2x short
|-
! scope="row"| T45
| [[File:Screw Head - Torx.svg|frameless|20px|center]]
| Torx
| 1x short
|-
! scope="row"| T8H
| [[File:Screw Head - Torx Tamperproof.svg|frameless|20px|center]]
| Security Torx
| 1x short
|-
! scope="row"| T10H
| [[File:Screw Head - Torx Tamperproof.svg|frameless|20px|center]]
| Security Torx
| 1x short
|-
! scope="row"| T15H
| [[File:Screw Head - Torx Tamperproof.svg|frameless|20px|center]]
| Security Torx
| 1x short
|-
! scope="row"| T25H
| [[File:Screw Head - Torx Tamperproof.svg|frameless|20px|center]]
| Security Torx
| 1x short
|-
! scope="row"| T27H
| [[File:Screw Head - Torx Tamperproof.svg|frameless|20px|center]]
| Security Torx
| 1x short
|-
! scope="row"| T30H
| [[File:Screw Head - Torx Tamperproof.svg|frameless|20px|center]]
| Security Torx
| 1x short
|-
! scope="row"| T35H
| [[File:Screw Head - Torx Tamperproof.svg|frameless|20px|center]]
| Security Torx
| 1x short
|-
! scope="row"| T40H
| [[File:Screw Head - Torx Tamperproof.svg|frameless|20px|center]]
| Security Torx
| 1x short
|-
! scope="row"| 1.5 mm
| [[File:Screw Head - Hex Socket.svg|frameless|20px|center]]
| hex socket
| 1x short
|-
! scope="row"| 1.59 mm (1/16")
| [[File:Screw Head - Hex Socket.svg|frameless|20px|center]]
| hex socket
| 1x short
|-
! scope="row"| 1.98 mm (5/64")
| [[File:Screw Head - Hex Socket.svg|frameless|20px|center]]
| hex socket
| 1x short
|-
! scope="row"| 2.4 mm (3/32")
| [[File:Screw Head - Hex Socket.svg|frameless|20px|center]]
| hex socket
| 1x short
|-
! scope="row"| 2.5 mm
| [[File:Screw Head - Hex Socket.svg|frameless|20px|center]]
| hex socket
| 1x short
|-
! scope="row"| 2.8 mm (7/64")
| [[File:Screw Head - Hex Socket.svg|frameless|20px|center]]
| hex socket
| 1x short
|-
! scope="row"| 3.2 mm (1/8")
| [[File:Screw Head - Hex Socket.svg|frameless|20px|center]]
| hex socket
| 1x short
|-
! scope="row"| 3.6 mm (9/64")
| [[File:Screw Head - Hex Socket.svg|frameless|20px|center]]
| hex socket
| 1x short
|-
! scope="row"| 4 mm
| [[File:Screw Head - Hex Socket.svg|frameless|20px|center]]
| hex socket
| 2x short(?), 1x long
|-
! scope="row"| 4.8 mm (3/16")
| [[File:Screw Head - Hex Socket.svg|frameless|20px|center]]
| hex socket
| 1x short
|-
! scope="row"| 5 mm
| [[File:Screw Head - Hex Socket.svg|frameless|20px|center]]
| hex socket
| 1x short, 1x long
|-
! scope="row"| 5.5 mm
| [[File:Screw Head - Hex Socket.svg|frameless|20px|center]]
| hex socket
| 1x short
|-
! scope="row"| 5.6 mm (7/32")
| [[File:Screw Head - Hex Socket.svg|frameless|20px|center]]
| hex socket
| 1x short
|-
! scope="row"| 6 mm
| [[File:Screw Head - Hex Socket.svg|frameless|20px|center]]
| hex socket
| 1x short, 1x long
|-
! scope="row"| 6.4 mm (1/4")
| [[File:Screw Head - Hex Socket.svg|frameless|20px|center]]
| hex socket
| 1x short
|-
! scope="row"| 1.98 mm (5/64")
| [[File:Pin-in-hex_socket_screw_drive_003.png|frameless|20px|center]]
| security hex socket
| 1x short
|-
! scope="row"| 2 mm
| [[File:Pin-in-hex_socket_screw_drive_003.png|frameless|20px|center]]
| security hex socket
| 1x short
|-
! scope="row"| 2.4 mm (3/32")
| [[File:Pin-in-hex_socket_screw_drive_003.png|frameless|20px|center]]
| security hex socket
| 1x short
|-
! scope="row"| 2.5 mm
| [[File:Pin-in-hex_socket_screw_drive_003.png|frameless|20px|center]]
| security hex socket
| 1x short
|-
! scope="row"| 2.8 mm (7/64")
| [[File:Pin-in-hex_socket_screw_drive_003.png|frameless|20px|center]]
| security hex socket
| 1x short
|-
! scope="row"| 3 mm
| [[File:Pin-in-hex_socket_screw_drive_003.png|frameless|20px|center]]
| security hex socket
| 1x short
|-
! scope="row"| 3.2 mm (1/8")
| [[File:Pin-in-hex_socket_screw_drive_003.png|frameless|20px|center]]
| security hex socket
| 1x short
|-
! scope="row"| 3.6 mm (9/64")
| [[File:Pin-in-hex_socket_screw_drive_003.png|frameless|20px|center]]
| security hex socket
| 1x short
|-
! scope="row"| 4 mm (5/32")
| [[File:Pin-in-hex_socket_screw_drive_003.png|frameless|20px|center]]
| security hex socket
| 2x short
|-
! scope="row"| 5 mm
| [[File:Pin-in-hex_socket_screw_drive_003.png|frameless|20px|center]]
| security hex socket
| 1x short
|-
! scope="row"| 6 mm
| [[File:Pin-in-hex_socket_screw_drive_003.png|frameless|20px|center]]
| security hex socket
| 1x short
|-
! scope="row"| 6
| [[File:Screw Head - Torq-set.svg|frameless|20px|center]]
| Torq-set
| 1x short
|-
! scope="row"| 8
| [[File:Screw Head - Torq-set.svg|frameless|20px|center]]
| Torq-set
| 1x short
|-
! scope="row"| 10
| [[File:Screw Head - Torq-set.svg|frameless|20px|center]]
| Torq-set
| 1x short
|-
! scope="row"| 1
| [[File:Screw Head - Clutch Type G.svg|frameless|20px|center]]
| Clutch Type G
| 1x short
|-
! scope="row"| 2
| [[File:Screw Head - Clutch Type G.svg|frameless|20px|center]]
| Clutch Type G
| 1x short
|-
! scope="row"| 3
| [[File:Screw Head - Clutch Type G.svg|frameless|20px|center]]
| Clutch Type G
| 1x short
|-
! scope="row"| 0
| [[File:Screw Head - Robertson.svg|frameless|20px|center]]
| Robertson
| 1x short
|-
! scope="row"| 1
| [[File:Screw Head - Robertson.svg|frameless|20px|center]]
| Robertson
| 1x short
|-
! scope="row"| 2
| [[File:Screw Head - Robertson.svg|frameless|20px|center]]
| Robertson
| 1x short
|-
! scope="row"| 3
| [[File:Screw Head - Robertson.svg|frameless|20px|center]]
| Robertson
| 1x short
|-
! scope="row"| 1
| [[File:Screw Head - Tri-wing.svg|frameless|20px|center]]
| Tri-wing
| 1x short
|-
! scope="row"| 2
| [[File:Screw Head - Tri-wing.svg|frameless|20px|center]]
| Tri-wing
| 1x short
|-
! scope="row"| 3
| [[File:Screw Head - Tri-wing.svg|frameless|20px|center]]
| Tri-wing
| 1x short
|-
! scope="row"| 4
| [[File:Screw Head - Tri-wing.svg|frameless|20px|center]]
| Tri-wing
| 1x short
|-
! scope="row"| 4
| [[File:Screw Head - Spanner.svg|frameless|20px|center]]
| spanner
| 1x short
|-
! scope="row"| 6
| [[File:Screw Head - Spanner.svg|frameless|20px|center]]
| spanner
| 1x short
|-
! scope="row"| 8
| [[File:Screw Head - Spanner.svg|frameless|20px|center]]
| spanner
| 1x short
|-
! scope="row"| 10
| [[File:Screw Head - Spanner.svg|frameless|20px|center]]
| spanner
| 1x short
|}
 
== Bohrer ==
* [[Forstnerbohrer]] "Wave Cutter", Fisch, 1-5/8" ([https://www.feinewerkzeuge.de/fisch-forstnerbohrer-inch.html Nr. 316192])
** für Teelicht-Hülsen (z.B. [[Project:Tree Trunk Tealights]])
* [[Holzspiralbohrer]] 3-10 mm (1-mm-Schritte)
* Holzspiralbohrer mit Senker 3/4/5/6 mm (letzterer noch China-"Qualität")
* [[Schlangenbohrer]] 3/4" (für Holdfasts etc.)
 
* [[Metallspiralbohrer]] 1-10 mm (0,5-mm-Schritte)
* [[Gewindeschneider]] (einfach, M3-4-5-6-8-10-12) mit Metallspiralbohrern in Zwischengrößen (2.5-3.3-4.2-5-6.8-8.5-10.2)
* [[Glasbohrer]] 4 mm
 
== Drechseleisen ==
* [https://www.stabilo-fachmarkt.de/guede-drechselbeitel-drechseleisen-satz-5-tlg/a-914817/ Güde Billig-Set] (öffentlich)
* Schruppröhre 3/4", Narex
* Schalenröhre 1/2" (13 mm), Narex
* Drehröhre "knapp 10 mm" (3/8"?), Crown
 
== Fräser ==
{| class="wikitable sortable"
|-
! scope="col"| Durchmesser
! scope="col"| Schaft
! scope="col"| Länge
! scope="col"| Schneiden
! scope="col"| Form
! scope="col"| Material
! scope="col"| Notizen
|-
! scope="row"| 2 mm
| 3,175 mm
|
| 2
| "gerade"
| VHM
| klare Kassette
|-
! scope="row"| 3,175 mm
| 3,175 mm
| 22/38 mm
| 1
| "gerade"
| VHM
| klare Kassette
|-
! scope="row"| 3,175 mm
| 3,175 mm
|
| 2
| "gerade"
| VHM
| klare Kassette
|-
! scope="row"| 4 mm
| 4 mm
| 17/45 mm
| 2
| "gerade"
| VHM
| klare Kassette, 2x
|-
! scope="row"| 6 mm
| 6 mm
| 18/50 mm
| 3
| "gerade"
| VHM
| blau/klare Hülse
|-
! scope="row"| 2 mm
| 6 mm
| 7/51 mm
| 2
| "gerade"
| M38
| blaue Hülse
|-
! scope="row"| 3 mm
| 6 mm
| 8/52 mm
| 2
| "gerade"
| M38
| blaue Hülse
|-
! scope="row"| 4 mm
| 6 mm
| 11/55 mm
| 2
| "gerade"
| M38
| blaue Hülse
|-
! scope="row"| 6 mm
| 6 mm
| 13/57 mm
| 2
| "gerade"
| M38
| blaue Hülse
|-
! scope="row"| 8 mm
| 6 mm
| 19/63 mm
| 2
| "gerade"
| M38
| blaue Hülse
|-
! scope="row"| 0-10 mm
| 6 mm
| 10/44 mm
| 2
| 60° V-groove
| Hartmetall aufgelötet
| 2x
|-
! scope="row"| 12.7 mm
| 8 mm
| 25.4/71 mm
| 2
| Bündigfräser
| Hartmetall aufgelötet
| Hikoki Nr. 754109 [https://www.hornbach.de/shop/HM-Buendigfraeser-HiKOKI-12-7x71-mm/8822193/artikel.html von Hornbach]
|-
! scope="row"| 12.7 mm
| 8 mm
| 50/87 mm
| 2
| Bündigfräser
| Hartmetall aufgelötet
| weiße Hülse - günstiger von ebay, nochmal gut nachmessen!
|-
! scope="row"| 16 mm
| 8 mm
| 11/40 mm
| 2
| "Kugel"
| Hartmetall aufgelötet
| Blister; [https://www.feinewerkzeuge.de/hohlkehlfraeser.html Nr. 360506]
|}
 
VHM: Vollhartmetall
M38: wohl etwas besser als HSS
 
== Hobel ==
* DICTUM langer Schlichthobel Nr. 5 (SK4-Eisen)
** Fasenwinkel 25° (allerdings "bevel down": Schnittwinkel 45° unabhängig vom Anschliff)
* JUUMA Flachwinkel-Einhandhobel (T10-Eisen)
** Fasenwinkel 25°, Schnittwinkel 38°
** [https://www.feinewerkzeuge.de/pdf/juuma-bevelup-anleitung-de.pdf Anleitung (feinewerkzeuge.de)]
* ''diverse Holzhobel''
 
== Sägen ==
* Dekupiersägebogen ''(coping saw)'': PEBARO, 17 cm (16,3 cm Pin-Abstand)
 
=== Japansägen ===
* Dozuki
* Dozuki
** Hersteller: juuma
** Hersteller: juuma
Line 19: Line 575:
** Blattlänge/''blade length'': 250 mm
** Blattlänge/''blade length'': 250 mm
** ''irgendwas mit 0.5 und 0.65 +/- 0.05 mm''
** ''irgendwas mit 0.5 und 0.65 +/- 0.05 mm''
* "Haifischsäge" (gröbere Kataba)
** Hersteller: Keil Werkzeugfabrik (Griff selbstgeschnitzt)
*** Modell Nr. 10-2312, Ersatzblatt-Nr. 01-2312
** Blattlänge 300 mm
** 14 TPI
== Schleifsteine ==
* Diamant - mit Wasser benetzen, vertragen nicht viel Druck an Kanten<sup> [https://www.feinewerkzeuge.de/ezelap-diasharpener.html]</sup>
** EZE-LAP 61M (Korn 400, 152{{x}}51 mm)
** EZE-LAP 61F (Korn 600, 152{{x}}51 mm)
== Schraubstöcke ==
* kleiner schwenkbarer (zuhause)
** völlig verrostet gefunden, Anfang 2018 wieder hergerichtet
* großer Tischlerschraubstock an [[Roubo Workbench]]
** [https://www.feinewerkzeuge.de/schraub.html York No. 53ED]
** siehe [[Woodworking Vise]]


== Stechbeitel ==
== Stechbeitel ==
* 6, 12, 24 mm "Kork"
* 6, 12, 24 mm "Kork"
** Hersteller: Stubai
** Hersteller: Stubai
== Wendeplatten ==
* 10x quadratisch (Maße?)
* 10x rund (Maße?)
* [http://www.holzwerken.net/Wissen/Tipps-Tricks/Werkstatt/Kleine-Plaettchen-mit-viel-Potenzial HolzWerken, "Kleine Plättchen mit viel Potenzial"]
== Sonstiges ==
* Kombinationswinkel: Starrett 33MH-300
* Streichmaß: Veritas "micro adjust wheel marking gauge"
* Black & Decker "Workmate 2000" - deutlich gebraucht gekauft, ohne Accessoires
** gut bebilderte (FR) Anleitung: https://vdocuments.mx/workmate-2000-manual.html
** entrostet & neu lackiert 2020-3
** geplante Upgrades: Tischplatte (original: 90{{x}}49{{x}}2 cm), Bankhaken

Revision as of 17:56, 9 July 2020

"private" Seite mit einigen Werkzeugen aus meiner persönlichen Sammlung - Ausleihen tendenziell möglich, einfach fragen!

3D-Drucker

Prusa i3 Acrylic (ähnlich "Anet A8"), soll Diamond Hotend bekommen und lief deshalb noch nie...

Arbeitsschutz

  • Halbmaske: Dräger X-plore 3500
    • Filter "Pure P3 R"; Größe L

Bits

graues Set

nicht mehr ganz vollständig, v. a. security Torx; manche im Forum-Set

Size Screw Symbol Screw Type Notes   
PH0
Screw Head - Phillips.svg
Phillips 2x short
PH1
Screw Head - Phillips.svg
Phillips 3x short, 2x long
PH2
Screw Head - Phillips.svg
Phillips 2x short
PH3
Screw Head - Phillips.svg
Phillips 7x short, 2x long
PZ0
Screw Head - Pozidrive.svg
Pozidriv 1x short
PZ1
Screw Head - Pozidrive.svg
Pozidriv 4x short
PZ2
Screw Head - Pozidrive.svg
Pozidriv 10x short, 1x long
PZ3
Screw Head - Pozidrive.svg
Pozidriv 2x short, 1x long
4 mm
Screw Head - Slotted.svg
slotted 1x long
4.5 mm
Screw Head - Slotted.svg
slotted 1x short
5 mm
Screw Head - Slotted.svg
slotted 1x long
5.5 mm
Screw Head - Slotted.svg
slotted 1x short
6 mm
Screw Head - Slotted.svg
slotted 1x long
6.5 mm
Screw Head - Slotted.svg
slotted 1x short
7 mm
Screw Head - Slotted.svg
slotted 1x long
T8
Screw Head - Torx.svg
Torx 1x short
T10
Screw Head - Torx.svg
Torx 2x short, 1x long
T15
Screw Head - Torx.svg
Torx 2x short
T20
Screw Head - Torx.svg
Torx 2x short, 1x long
T25
Screw Head - Torx.svg
Torx 2x short
T27
Screw Head - Torx.svg
Torx 1x short
T30
Screw Head - Torx.svg
Torx 2x short, 1x long
T40
Screw Head - Torx.svg
Torx 2x short
T45
Screw Head - Torx.svg
Torx 1x short
T8H
Screw Head - Torx Tamperproof.svg
Security Torx 1x short
T10H
Screw Head - Torx Tamperproof.svg
Security Torx 1x short
T15H
Screw Head - Torx Tamperproof.svg
Security Torx 1x short
T25H
Screw Head - Torx Tamperproof.svg
Security Torx 1x short
T27H
Screw Head - Torx Tamperproof.svg
Security Torx 1x short
T30H
Screw Head - Torx Tamperproof.svg
Security Torx 1x short
T35H
Screw Head - Torx Tamperproof.svg
Security Torx 1x short
T40H
Screw Head - Torx Tamperproof.svg
Security Torx 1x short
1.5 mm
Screw Head - Hex Socket.svg
hex socket 1x short
1.59 mm (1/16")
Screw Head - Hex Socket.svg
hex socket 1x short
1.98 mm (5/64")
Screw Head - Hex Socket.svg
hex socket 1x short
2.4 mm (3/32")
Screw Head - Hex Socket.svg
hex socket 1x short
2.5 mm
Screw Head - Hex Socket.svg
hex socket 1x short
2.8 mm (7/64")
Screw Head - Hex Socket.svg
hex socket 1x short
3.2 mm (1/8")
Screw Head - Hex Socket.svg
hex socket 1x short
3.6 mm (9/64")
Screw Head - Hex Socket.svg
hex socket 1x short
4 mm
Screw Head - Hex Socket.svg
hex socket 2x short(?), 1x long
4.8 mm (3/16")
Screw Head - Hex Socket.svg
hex socket 1x short
5 mm
Screw Head - Hex Socket.svg
hex socket 1x short, 1x long
5.5 mm
Screw Head - Hex Socket.svg
hex socket 1x short
5.6 mm (7/32")
Screw Head - Hex Socket.svg
hex socket 1x short
6 mm
Screw Head - Hex Socket.svg
hex socket 1x short, 1x long
6.4 mm (1/4")
Screw Head - Hex Socket.svg
hex socket 1x short
1.98 mm (5/64")
Pin-in-hex socket screw drive 003.png
security hex socket 1x short
2 mm
Pin-in-hex socket screw drive 003.png
security hex socket 1x short
2.4 mm (3/32")
Pin-in-hex socket screw drive 003.png
security hex socket 1x short
2.5 mm
Pin-in-hex socket screw drive 003.png
security hex socket 1x short
2.8 mm (7/64")
Pin-in-hex socket screw drive 003.png
security hex socket 1x short
3 mm
Pin-in-hex socket screw drive 003.png
security hex socket 1x short
3.2 mm (1/8")
Pin-in-hex socket screw drive 003.png
security hex socket 1x short
3.6 mm (9/64")
Pin-in-hex socket screw drive 003.png
security hex socket 1x short
4 mm (5/32")
Pin-in-hex socket screw drive 003.png
security hex socket 2x short
5 mm
Pin-in-hex socket screw drive 003.png
security hex socket 1x short
6 mm
Pin-in-hex socket screw drive 003.png
security hex socket 1x short
6
Screw Head - Torq-set.svg
Torq-set 1x short
8
Screw Head - Torq-set.svg
Torq-set 1x short
10
Screw Head - Torq-set.svg
Torq-set 1x short
1
Screw Head - Clutch Type G.svg
Clutch Type G 1x short
2
Screw Head - Clutch Type G.svg
Clutch Type G 1x short
3
Screw Head - Clutch Type G.svg
Clutch Type G 1x short
0
Screw Head - Robertson.svg
Robertson 1x short
1
Screw Head - Robertson.svg
Robertson 1x short
2
Screw Head - Robertson.svg
Robertson 1x short
3
Screw Head - Robertson.svg
Robertson 1x short
1
Screw Head - Tri-wing.svg
Tri-wing 1x short
2
Screw Head - Tri-wing.svg
Tri-wing 1x short
3
Screw Head - Tri-wing.svg
Tri-wing 1x short
4
Screw Head - Tri-wing.svg
Tri-wing 1x short
4
Screw Head - Spanner.svg
spanner 1x short
6
Screw Head - Spanner.svg
spanner 1x short
8
Screw Head - Spanner.svg
spanner 1x short
10
Screw Head - Spanner.svg
spanner 1x short

Bohrer

Drechseleisen

  • Güde Billig-Set (öffentlich)
  • Schruppröhre 3/4", Narex
  • Schalenröhre 1/2" (13 mm), Narex
  • Drehröhre "knapp 10 mm" (3/8"?), Crown

Fräser

Durchmesser Schaft Länge Schneiden Form Material Notizen
2 mm 3,175 mm 2 "gerade" VHM klare Kassette
3,175 mm 3,175 mm 22/38 mm 1 "gerade" VHM klare Kassette
3,175 mm 3,175 mm 2 "gerade" VHM klare Kassette
4 mm 4 mm 17/45 mm 2 "gerade" VHM klare Kassette, 2x
6 mm 6 mm 18/50 mm 3 "gerade" VHM blau/klare Hülse
2 mm 6 mm 7/51 mm 2 "gerade" M38 blaue Hülse
3 mm 6 mm 8/52 mm 2 "gerade" M38 blaue Hülse
4 mm 6 mm 11/55 mm 2 "gerade" M38 blaue Hülse
6 mm 6 mm 13/57 mm 2 "gerade" M38 blaue Hülse
8 mm 6 mm 19/63 mm 2 "gerade" M38 blaue Hülse
0-10 mm 6 mm 10/44 mm 2 60° V-groove Hartmetall aufgelötet 2x
12.7 mm 8 mm 25.4/71 mm 2 Bündigfräser Hartmetall aufgelötet Hikoki Nr. 754109 von Hornbach
12.7 mm 8 mm 50/87 mm 2 Bündigfräser Hartmetall aufgelötet weiße Hülse - günstiger von ebay, nochmal gut nachmessen!
16 mm 8 mm 11/40 mm 2 "Kugel" Hartmetall aufgelötet Blister; Nr. 360506

VHM: Vollhartmetall M38: wohl etwas besser als HSS

Hobel

  • DICTUM langer Schlichthobel Nr. 5 (SK4-Eisen)
    • Fasenwinkel 25° (allerdings "bevel down": Schnittwinkel 45° unabhängig vom Anschliff)
  • JUUMA Flachwinkel-Einhandhobel (T10-Eisen)
  • diverse Holzhobel

Sägen

  • Dekupiersägebogen (coping saw): PEBARO, 17 cm (16,3 cm Pin-Abstand)

Japansägen

  • Dozuki
    • Hersteller: juuma
    • Blattlänge/blade length: 240 mm
    • Schnitttiefe/cutting depth: 50 mm
    • Blattstärke/blade thickness: 0.3 mm
    • Schränkung/kerf: 0.45 mm
    • Zahnteilung/pitch: 1.4 mm - 18 TPI
  • Ryoba
    • Hersteller: Bakuma ("SM250W")
    • Blattlänge/blade length: 250 mm (rip: 218 mm)
    • irgendwas mit 0.5 und 0.9 +/- 0.05 mm
  • Kataba
    • Hersteller: Bakuma
    • Blattlänge/blade length: 250 mm
    • irgendwas mit 0.5 und 0.65 +/- 0.05 mm
  • "Haifischsäge" (gröbere Kataba)
    • Hersteller: Keil Werkzeugfabrik (Griff selbstgeschnitzt)
      • Modell Nr. 10-2312, Ersatzblatt-Nr. 01-2312
    • Blattlänge 300 mm
    • 14 TPI

Schleifsteine

  • Diamant - mit Wasser benetzen, vertragen nicht viel Druck an Kanten [1]
    • EZE-LAP 61M (Korn 400, 152 × 51 mm)
    • EZE-LAP 61F (Korn 600, 152 × 51 mm)

Schraubstöcke

Stechbeitel

  • 6, 12, 24 mm "Kork"
    • Hersteller: Stubai

Wendeplatten

  • 10x quadratisch (Maße?)
  • 10x rund (Maße?)

Sonstiges

  • Kombinationswinkel: Starrett 33MH-300
  • Streichmaß: Veritas "micro adjust wheel marking gauge"
  • Black & Decker "Workmate 2000" - deutlich gebraucht gekauft, ohne Accessoires