User:Lukas/Werkzeug: Difference between revisions

From CoMakingSpace Wiki
(added DeWalt DW411 to the list)
(→‎Fräser: "Zugänge" durch Aufräumaktion)
 
(9 intermediate revisions by the same user not shown)
Line 1: Line 1:
''"private" Seite mit einigen Werkzeugen aus meiner persönlichen Sammlung - Ausleihen tendenziell möglich, einfach fragen!''  
''"private" Seite mit einigen Werkzeugen aus meiner persönlichen Sammlung - [[Tools to Lend|Ausleihen]] tendenziell möglich, einfach fragen!''  


== 3D-Drucker ==
== 3D-Drucker ==
Line 434: Line 434:
* [[Gewindeschneider]] (einfach, M3-4-5-6-8-10-12) mit Metallspiralbohrern in Zwischengrößen (2.5-3.3-4.2-5-6.8-8.5-10.2)
* [[Gewindeschneider]] (einfach, M3-4-5-6-8-10-12) mit Metallspiralbohrern in Zwischengrößen (2.5-3.3-4.2-5-6.8-8.5-10.2)
* [[Glasbohrer]] 4 mm
* [[Glasbohrer]] 4 mm
== Bohrmaschine ==
''[[User:Lukas/Impact Drill]]''


== Drechseleisen ==
== Drechseleisen ==
Line 446: Line 449:
! scope="col"| Durchmesser
! scope="col"| Durchmesser
! scope="col"| Schaft
! scope="col"| Schaft
! scope="col"| Länge
! scope="col"| Länge (Schneiden/Gesamt)
! scope="col"| Schneiden
! scope="col"| Schneiden
! scope="col"| Form
! scope="col"| Form
Line 484: Line 487:
| klare Kassette, 2x
| klare Kassette, 2x
|-
|-
! scope="row"| 6 mm
|-
! scope="row"| 1,6 mm
| 6 mm
| 6 mm
| 18/50 mm
| 5/59 mm
| 3
| 4
| "gerade"
| ''gerade''
| VHM
| ''?? (solide)''
| blau/klare Hülse
| "16 x 4 x 16 x2 16"
|-
! scope="row"| 2 mm
! scope="row"| 2 mm
| 6 mm
| 6 mm
Line 523: Line 526:
| M38
| M38
| blaue Hülse
| blaue Hülse
|-
! scope="row"| 6 mm
| 6 mm
| 18/50 mm
| 3
| "gerade"
| VHM
| blau/klare Hülse
|-
|-
! scope="row"| 8 mm
! scope="row"| 8 mm
Line 539: Line 550:
| Hartmetall aufgelötet
| Hartmetall aufgelötet
| 2x
| 2x
|-
! scope="row"| 0-8 mm
| 8 mm
| 11/66 mm
| 4
| 45° countersink
| ''?? (solide)''
| "iscar EC-E4L [...] 908B8"; 2x sehr ähnlich
|-
! scope="row"| 8 mm
| 8 mm
| 32/63 mm
| 2
| "gerade"
| ''?? (solide)''
| "Ultra-Tools USA 8.0"
|-
! scope="row"| 8 mm
| 8 mm
| 29/66 mm
| 3
| ''gerade''
| M2Al
| "''hy'' 8x8 M2Al"
|-
|-
! scope="row"| 12.7 mm
! scope="row"| 12.7 mm
Line 544: Line 579:
| 25.4/71 mm
| 25.4/71 mm
| 2
| 2
| Bündigfräser
| Bündigfräser (Kugellager an Spitze)
| Hartmetall aufgelötet
| Hartmetall aufgelötet
| Hikoki Nr. 754109 [https://www.hornbach.de/shop/HM-Buendigfraeser-HiKOKI-12-7x71-mm/8822193/artikel.html von Hornbach]
| Hikoki Nr. 754109 [https://www.hornbach.de/shop/HM-Buendigfraeser-HiKOKI-12-7x71-mm/8822193/artikel.html von Hornbach]
Line 552: Line 587:
| 50/87 mm
| 50/87 mm
| 2
| 2
| Bündigfräser
| Bündigfräser (Kugellager an Spitze)
| Hartmetall aufgelötet
| Hartmetall aufgelötet
| weiße Hülse - günstiger von ebay, nochmal gut nachmessen!
| weiße Hülse - günstiger von ebay, nochmal gut nachmessen!
Line 567: Line 602:
VHM: Vollhartmetall
VHM: Vollhartmetall
M38: wohl etwas besser als HSS
M38: wohl etwas besser als HSS
M2Al: kobaltfreier superharter Schnellarbeitsstahl mit Aluminium


== Hobel ==
== Hobel ==
Line 604: Line 640:
** 14 TPI
** 14 TPI


== Kettensäge ==
=== Kettensäge ===
''[[User:Lukas/Chainsaw]]''
''[[User:Lukas/Chainsaw]]''
=== Stichsäge ===
Bosch "1582.7 electronic", 520 W
* T-Schaft
* Blattwechsel: Schraube (tief im Knauf) lockern, Blatt hochdrücken und 90° ccw drehen, rausziehen --- neues Blatt 90° gedreht einsetzen, 90° cw drehen, Schraube festziehen
* Handbuch: ''ähnlich'' [https://www.manualslib.com/manual/19463/Bosch-1584avs.html Bosch 1584AVS (manualslib.com)]
Sägeblätter:
* Spezialset für Küchenplatten, Craftomat(?)


== Schleifgeräte ==
== Schleifgeräte ==
=== DeWalt DW411 ===
=== Schwingschleifer ===
{{MachineInfoBox
{{MachineInfoBox
|machine name=DeWalt DW411
|machine name=DeWalt DW411
|image=DeWalt DW411.JPG
|image=DeWalt DW411.JPG
|used with=[[sandpaper]] - 115{{x}}110 mm (with 8 holes)
|used with=[[sandpaper]] - 1/4 sheets<br>(115{{x}}140 mm; 8 holes)
|location=[[office]] - may be [[borrowed]]
|location=[[Lukas]] - may be [[borrowed]]
|manual=[https://www.manualslib.com/manual/814089/Dewalt-Dw411.html manualslib.com]
|manual=[https://www.manualslib.com/manual/814089/Dewalt-Dw411.html manualslib.com]
|extrabox=yes
|extrabox=yes
Line 624: Line 669:


May be [[borrowed]] for private use over short periods of time - just ask if you're interested!
May be [[borrowed]] for private use over short periods of time - just ask if you're interested!
=== Tellerschleifer ===
ehemals Drechselbank ([[User:Lukas/Güde 1000]]), Umbau: [[Project:Disc Sander]]


== Schleifsteine ==
== Schleifsteine ==
Line 636: Line 684:
** [https://www.feinewerkzeuge.de/schraub.html York No. 53ED]
** [https://www.feinewerkzeuge.de/schraub.html York No. 53ED]
** siehe [[Woodworking Vise]]
** siehe [[Woodworking Vise]]
== Spaltkeile ==
Vor allem fürs [[Drechseln]] und [[Project:Drying Timber]].
Hilfreich: [http://www.holzwurm-page.de/holz/holz/spaltbarkeit.htm Holzwurm-Page - "Spaltbarkeit von Holz"]
* Dreh-Spaltkeil Bison, Alu, 800 g
* Spaltkeil, geschmiedeter Werkzeugstahl, 2000 g
* 3 kleinere Meißel


== Stechbeitel ==
== Stechbeitel ==
Line 646: Line 703:


* [http://www.holzwerken.net/Wissen/Tipps-Tricks/Werkstatt/Kleine-Plaettchen-mit-viel-Potenzial HolzWerken, "Kleine Plättchen mit viel Potenzial"]
* [http://www.holzwerken.net/Wissen/Tipps-Tricks/Werkstatt/Kleine-Plaettchen-mit-viel-Potenzial HolzWerken, "Kleine Plättchen mit viel Potenzial"]
== Winkelschleifer ==
=== King Craft WS 125 ===
{{MachineInfoBox
|machine name=King Craft WS 125
|image=King Craft WS-125.jpg
|location={{£}}
|access=ask nicely - may be [[borrowed]] [[Category:Borrowable]]
|tutors=
|manual=
|used with=125 mm [[Grinding Discs|grinding discs]]
|extrabox=yes
}}
'''CAUTION - the "King Craft" grinder has a switch that will stay on until you push it back to the "off" position, so it could surprisingly start when plugged in!'''
{{£}} [[loan]]ed this machine to the Space for about three years until we were able to buy the better ones. It's not great, but may still come in handy if you need it for a few cuts at home - just ask!
This grinder works with '''125 mm [[Abrasive Discs|discs]]'''.


== Sonstiges ==
== Sonstiges ==

Latest revision as of 02:24, 14 March 2024

"private" Seite mit einigen Werkzeugen aus meiner persönlichen Sammlung - Ausleihen tendenziell möglich, einfach fragen!

3D-Drucker

Prusa i3 Acrylic (ähnlich "Anet A8"), soll Diamond Hotend bekommen und lief deshalb noch nie...

Akkuschrauber

Bosch PSR 960

MachineInfoBox

Bosch PSR 960

PSR960.jpg
Location: Lukas' workbench
Access Requirements:
Manual: in the box
Tutors:


Lukas has a Bosch PSR 960 you might be able to borrow! Unfortunately, its battery has gotten pretty bad.

It has six torque settings and only one speed.

Power Supply
There used to be two batteries, but one was quite old and only held its charge for a very short time. It was therefore upgraded to a corded pack.
Charger for the intact one: "AL 1404", 7.2 to 14.4 V, 400 mA => 3 h charging time for the 1.2 Ah pack
Please do not leave the battery in the charger for more than 3 or 4 hours, the old NiCd batteries will heat up and suffer from quite the memory effect!


Arbeitsschutz

  • Halbmaske: Dräger X-plore 3500
    • Filter "Pure P3 R"; Größe L

Bits

graues Set

nicht mehr ganz vollständig, v. a. security Torx; manche im Forum-Set

Size Screw Symbol Screw Type Notes   
PH0
Screw Head - Phillips.svg
Phillips 2x short
PH1
Screw Head - Phillips.svg
Phillips 3x short, 2x long
PH2
Screw Head - Phillips.svg
Phillips 2x short
PH3
Screw Head - Phillips.svg
Phillips 7x short, 2x long
PZ0
Screw Head - Pozidrive.svg
Pozidriv 1x short
PZ1
Screw Head - Pozidrive.svg
Pozidriv 4x short
PZ2
Screw Head - Pozidrive.svg
Pozidriv 10x short, 1x long
PZ3
Screw Head - Pozidrive.svg
Pozidriv 2x short, 1x long
4 mm
Screw Head - Slotted.svg
slotted 1x long
4.5 mm
Screw Head - Slotted.svg
slotted 1x short
5 mm
Screw Head - Slotted.svg
slotted 1x long
5.5 mm
Screw Head - Slotted.svg
slotted 1x short
6 mm
Screw Head - Slotted.svg
slotted 1x long
6.5 mm
Screw Head - Slotted.svg
slotted 1x short
7 mm
Screw Head - Slotted.svg
slotted 1x long
T8
Screw Head - Torx.svg
Torx 1x short
T10
Screw Head - Torx.svg
Torx 2x short, 1x long
T15
Screw Head - Torx.svg
Torx 2x short
T20
Screw Head - Torx.svg
Torx 2x short, 1x long
T25
Screw Head - Torx.svg
Torx 2x short
T27
Screw Head - Torx.svg
Torx 1x short
T30
Screw Head - Torx.svg
Torx 2x short, 1x long
T40
Screw Head - Torx.svg
Torx 2x short
T45
Screw Head - Torx.svg
Torx 1x short
T8H
Screw Head - Torx Tamperproof.svg
Security Torx 1x short
T10H
Screw Head - Torx Tamperproof.svg
Security Torx 1x short
T15H
Screw Head - Torx Tamperproof.svg
Security Torx 1x short
T25H
Screw Head - Torx Tamperproof.svg
Security Torx 1x short
T27H
Screw Head - Torx Tamperproof.svg
Security Torx 1x short
T30H
Screw Head - Torx Tamperproof.svg
Security Torx 1x short
T35H
Screw Head - Torx Tamperproof.svg
Security Torx 1x short
T40H
Screw Head - Torx Tamperproof.svg
Security Torx 1x short
1.5 mm
Screw Head - Hex Socket.svg
hex socket 1x short
1.59 mm (1/16")
Screw Head - Hex Socket.svg
hex socket 1x short
1.98 mm (5/64")
Screw Head - Hex Socket.svg
hex socket 1x short
2.4 mm (3/32")
Screw Head - Hex Socket.svg
hex socket 1x short
2.5 mm
Screw Head - Hex Socket.svg
hex socket 1x short
2.8 mm (7/64")
Screw Head - Hex Socket.svg
hex socket 1x short
3.2 mm (1/8")
Screw Head - Hex Socket.svg
hex socket 1x short
3.6 mm (9/64")
Screw Head - Hex Socket.svg
hex socket 1x short
4 mm
Screw Head - Hex Socket.svg
hex socket 2x short(?), 1x long
4.8 mm (3/16")
Screw Head - Hex Socket.svg
hex socket 1x short
5 mm
Screw Head - Hex Socket.svg
hex socket 1x short, 1x long
5.5 mm
Screw Head - Hex Socket.svg
hex socket 1x short
5.6 mm (7/32")
Screw Head - Hex Socket.svg
hex socket 1x short
6 mm
Screw Head - Hex Socket.svg
hex socket 1x short, 1x long
6.4 mm (1/4")
Screw Head - Hex Socket.svg
hex socket 1x short
1.98 mm (5/64")
Pin-in-hex socket screw drive 003.png
security hex socket 1x short
2 mm
Pin-in-hex socket screw drive 003.png
security hex socket 1x short
2.4 mm (3/32")
Pin-in-hex socket screw drive 003.png
security hex socket 1x short
2.5 mm
Pin-in-hex socket screw drive 003.png
security hex socket 1x short
2.8 mm (7/64")
Pin-in-hex socket screw drive 003.png
security hex socket 1x short
3 mm
Pin-in-hex socket screw drive 003.png
security hex socket 1x short
3.2 mm (1/8")
Pin-in-hex socket screw drive 003.png
security hex socket 1x short
3.6 mm (9/64")
Pin-in-hex socket screw drive 003.png
security hex socket 1x short
4 mm (5/32")
Pin-in-hex socket screw drive 003.png
security hex socket 2x short
5 mm
Pin-in-hex socket screw drive 003.png
security hex socket 1x short
6 mm
Pin-in-hex socket screw drive 003.png
security hex socket 1x short
6
Screw Head - Torq-set.svg
Torq-set 1x short
8
Screw Head - Torq-set.svg
Torq-set 1x short
10
Screw Head - Torq-set.svg
Torq-set 1x short
1
Screw Head - Clutch Type G.svg
Clutch Type G 1x short
2
Screw Head - Clutch Type G.svg
Clutch Type G 1x short
3
Screw Head - Clutch Type G.svg
Clutch Type G 1x short
0
Screw Head - Robertson.svg
Robertson 1x short
1
Screw Head - Robertson.svg
Robertson 1x short
2
Screw Head - Robertson.svg
Robertson 1x short
3
Screw Head - Robertson.svg
Robertson 1x short
1
Screw Head - Tri-wing.svg
Tri-wing 1x short
2
Screw Head - Tri-wing.svg
Tri-wing 1x short
3
Screw Head - Tri-wing.svg
Tri-wing 1x short
4
Screw Head - Tri-wing.svg
Tri-wing 1x short
4
Screw Head - Spanner.svg
spanner 1x short
6
Screw Head - Spanner.svg
spanner 1x short
8
Screw Head - Spanner.svg
spanner 1x short
10
Screw Head - Spanner.svg
spanner 1x short

Bohrer

Bohrmaschine

User:Lukas/Impact Drill

Drechseleisen

  • Güde Billig-Set (öffentlich)
  • Schruppröhre 3/4", Narex
  • Schalenröhre 1/2" (13 mm), Narex
  • Drehröhre "knapp 10 mm" (3/8"?), Crown

Fräser

Durchmesser Schaft Länge (Schneiden/Gesamt) Schneiden Form Material Notizen
2 mm 3,175 mm 2 "gerade" VHM klare Kassette
3,175 mm 3,175 mm 22/38 mm 1 "gerade" VHM klare Kassette
3,175 mm 3,175 mm 2 "gerade" VHM klare Kassette
4 mm 4 mm 17/45 mm 2 "gerade" VHM klare Kassette, 2x
1,6 mm 6 mm 5/59 mm 4 gerade ?? (solide) "16 x 4 x 16 x2 16" 2 mm 6 mm 7/51 mm 2 "gerade" M38 blaue Hülse
3 mm 6 mm 8/52 mm 2 "gerade" M38 blaue Hülse
4 mm 6 mm 11/55 mm 2 "gerade" M38 blaue Hülse
6 mm 6 mm 13/57 mm 2 "gerade" M38 blaue Hülse
6 mm 6 mm 18/50 mm 3 "gerade" VHM blau/klare Hülse
8 mm 6 mm 19/63 mm 2 "gerade" M38 blaue Hülse
0-10 mm 6 mm 10/44 mm 2 60° V-groove Hartmetall aufgelötet 2x
0-8 mm 8 mm 11/66 mm 4 45° countersink ?? (solide) "iscar EC-E4L [...] 908B8"; 2x sehr ähnlich
8 mm 8 mm 32/63 mm 2 "gerade" ?? (solide) "Ultra-Tools USA 8.0"
8 mm 8 mm 29/66 mm 3 gerade M2Al "hy 8x8 M2Al"
12.7 mm 8 mm 25.4/71 mm 2 Bündigfräser (Kugellager an Spitze) Hartmetall aufgelötet Hikoki Nr. 754109 von Hornbach
12.7 mm 8 mm 50/87 mm 2 Bündigfräser (Kugellager an Spitze) Hartmetall aufgelötet weiße Hülse - günstiger von ebay, nochmal gut nachmessen!
16 mm 8 mm 11/40 mm 2 "Kugel" Hartmetall aufgelötet Blister; Nr. 360506

VHM: Vollhartmetall M38: wohl etwas besser als HSS M2Al: kobaltfreier superharter Schnellarbeitsstahl mit Aluminium

Hobel

  • DICTUM langer Schlichthobel Nr. 5 (SK4-Eisen)
    • Fasenwinkel 25° (allerdings "bevel down": Schnittwinkel 45° unabhängig vom Anschliff)
  • JUUMA Flachwinkel-Einhandhobel (T10-Eisen)
  • diverse Holzhobel

Sägen

  • Dekupiersägebogen (coping saw): PEBARO, 17 cm (16,3 cm Pin-Abstand)

Japansägen

  • Dozuki
    • Hersteller: juuma
    • Blattlänge/blade length: 240 mm
    • Schnitttiefe/cutting depth: 50 mm
    • Blattstärke/blade thickness: 0.3 mm
    • Schränkung/kerf: 0.45 mm
    • Zahnteilung/pitch: 1.4 mm - 18 TPI
  • Ryoba
    • Hersteller: Bakuma ("SM250W")
    • Blattlänge/blade length: 250 mm (rip: 218 mm)
    • irgendwas mit 0.5 und 0.9 +/- 0.05 mm
  • Kataba
    • Hersteller: Bakuma
    • Blattlänge/blade length: 250 mm
    • irgendwas mit 0.5 und 0.65 +/- 0.05 mm
  • "Haifischsäge" (gröbere Kataba)
    • Hersteller: Keil Werkzeugfabrik (Griff selbstgeschnitzt)
      • Modell Nr. 10-2312, Ersatzblatt-Nr. 01-2312
    • Blattlänge 300 mm
    • 14 TPI

Kettensäge

User:Lukas/Chainsaw

Stichsäge

Bosch "1582.7 electronic", 520 W

  • T-Schaft
  • Blattwechsel: Schraube (tief im Knauf) lockern, Blatt hochdrücken und 90° ccw drehen, rausziehen --- neues Blatt 90° gedreht einsetzen, 90° cw drehen, Schraube festziehen
  • Handbuch: ähnlich Bosch 1584AVS (manualslib.com)

Sägeblätter:

  • Spezialset für Küchenplatten, Craftomat(?)

Schleifgeräte

Schwingschleifer

MachineInfoBox

DeWalt DW411

DeWalt DW411.JPG
Used with: sandpaper - 1/4 sheets
(115 × 140 mm; 8 holes)
Location: Lukas - may be borrowed
Access Requirements:
Manual: manualslib.com
Tutors:


DeWalt DW411 palm sander (Faustschleifer), received without a dust bag. A shop vac adapter should be made before using it inside!

Besides the dust issue, be aware that...

  • there is no protection against accidental start (the button will stay at "1" when the sander is unplugged while running)
  • holding the sander near its base gives control for details, but also shakes up your hand a lot more which quickly becomes tiring

May be borrowed for private use over short periods of time - just ask if you're interested!

Tellerschleifer

ehemals Drechselbank (User:Lukas/Güde 1000), Umbau: Project:Disc Sander

Schleifsteine

  • Diamant - mit Wasser benetzen, vertragen nicht viel Druck an Kanten [1]
    • EZE-LAP 61M (Korn 400, 152 × 51 mm)
    • EZE-LAP 61F (Korn 600, 152 × 51 mm)

Schraubstöcke

Spaltkeile

Vor allem fürs Drechseln und Project:Drying Timber.

Hilfreich: Holzwurm-Page - "Spaltbarkeit von Holz"

  • Dreh-Spaltkeil Bison, Alu, 800 g
  • Spaltkeil, geschmiedeter Werkzeugstahl, 2000 g
  • 3 kleinere Meißel

Stechbeitel

  • 6, 12, 24 mm "Kork"
    • Hersteller: Stubai

Wendeplatten

  • 10x quadratisch (Maße?)
  • 10x rund (Maße?)

Winkelschleifer

King Craft WS 125

MachineInfoBox

King Craft WS 125

King Craft WS-125.jpg
Used with: 125 mm grinding discs
Location: Lukas
Access Requirements:
Tutors:


CAUTION - the "King Craft" grinder has a switch that will stay on until you push it back to the "off" position, so it could surprisingly start when plugged in!

Lukas loaned this machine to the Space for about three years until we were able to buy the better ones. It's not great, but may still come in handy if you need it for a few cuts at home - just ask!

This grinder works with 125 mm discs.


Sonstiges

  • Kombinationswinkel: Starrett 33MH-300
  • Streichmaß: Veritas "micro adjust wheel marking gauge"
  • Black & Decker "Workmate 2000" - deutlich gebraucht gekauft, ohne Accessoires