Tyme Avon: Difference between revisions

From CoMakingSpace Wiki

m (InfoBox update for QR code)
(commissioning: done; documentation of further accessories: to be continued!)
Line 10: Line 10:
|used with=[[Face Shield|face shield]], [[Woodturning Tools|woodturning tools]]
|used with=[[Face Shield|face shield]], [[Woodturning Tools|woodturning tools]]
|extrabox=yes
|extrabox=yes
|assetid=118
}}
}}
The Tyme Avon is an old, but solidly built lathe that has replaced our flimsy Güde 1000.
The Tyme Avon is an old, but solidly built lathe that has replaced our flimsy Güde 1000.
{{Commissioning
|IssueNumber=264
|Naming=done
|NamingComment=Tyme Avon (exact model TBD by bed length)
|Picture=done
|PictureComment=
|Manual=not available
|ManualComment=print version for sale (expensive) [http://www.lathes.co.uk/tyme/ here]; reportedly not very useful beyond machine specs
|Documentation=
|DocumentationComment=explain (& photograph?) all major accessories and setup options; possible starting point besides manual: http://www.lathes.co.uk/tyme/
|QR=
|QRComment=
|Introduction=done
|IntroductionComment=[[Woodturning Introduction]] got slight changes
|Security= done
|SecurityComment=was fitted with an EU plug and a longer cord by [[Johannes]]; belt runs into the side of its pulleys, but pulleys can't be moved over - deemed safe (but may cost a new belt years from now)
|Test=done
|TestComment=
|OwnerValue=
|OwnerValueComment=donated by Joe; value not yet known
|Availability=
|AvailabilityComment=
}}


=== Specs ===
=== Specs ===

Revision as of 02:26, 29 September 2022

Tyme Avon

MachineInfoBox

Tyme Avon ATL301

Tyme Avon ATL301.jpg
Type: Wood Lathe
Material: woodturning blanks
Used with: face shield, woodturning tools
Location: wood workshop
Access Requirements: Woodturning Introduction
Tutors: Lukas








The Tyme Avon is an old, but solidly built lathe that has replaced our flimsy Güde 1000.

Specs

We seem to have the Model ATL301 with 36" (915 mm) between centers and a bed length of 52" (1320 mm).

  • max. workpiece diameter (above bed): 280 mm (11")
    • max. workpiece diameter (swiveled 90°): 495 mm (19.5")
    • max. workpiece diameter (swiveled 180°): 610 mm (24")
  • max. workpiece length: 900 mm
  • spindle speeds: 470 - 750 - 1150 - 2000 rpm
  • motor: 550 W (3/4 hp)
  • spindle thread: M25 × 2 mm; internal No. 2 morse taper (MK2)
  • workholding options:
    • headstock: drive center, faceplate, four-jaw chuck, ...
    • tailstock: No. 2 morse taper (MK2) - accessories: rotating centers, our "usual" drill chucks also fit

Speed Selection

The lathe can run at various speeds depending on which pulleys are connected by the belt:

spindle speeds resulting from each belt position

Do not put excessive tension on the belt - you'll be very happy about the belt slipping in case you've made a mistake and the tool digs into the workpiece!

New belts are still sold at store.lathes.co.uk


Retrieved from "https://wiki.comakingspace.de/index.php?title=Tyme_Avon&oldid=13012"