Sheet Sanders: Difference between revisions

From CoMakingSpace Wiki

(photos, commissioning update)
No edit summary
(8 intermediate revisions by 2 users not shown)
Line 1: Line 1:
{{ToolInfoBox
{{MachineInfoBox
|tool name=Sheet Sanders
|machine name=Sheet Sanders
|image=<!-- how about a GIF here? -->
|image=sheet sander motion.png
|synonyms=orbital finishing sanders;<br>DE: Schwingschleifer, Rutscher
|synonyms=orbital finishing sanders;<br>DE: Schwingschleifer, Rutscher
|type=power [[sanders]]
|type=power [[sanders]]
|material=depends on sanding sheet (usually [[wood]])
|material=depends on sanding sheet (usually [[wood]])
|used with=[[sandpaper]]
|used with=[[sandpaper]]
|location=[[Wood Workshop|wood workshop]]
|location=[[Location::Wood Workshop|wood workshop]]
|access=after [[commissioning]]
|access=[[Handheld Sander Introduction|handheld sander introduction]]
|tutors=
|tutors=[[Tutor::User:Lukas|Lukas]]
|manual=
|donation=
|similar=[[Eccentric Sanders|eccentric]] and other power [[sanders]]
|similar=[[Eccentric Sanders|eccentric]] and other power [[sanders]]
|extrabox=yes
}}
}}
Sheet sanders have a square orbiting pad that lets you reach into corners and remove a similar amount of material as [[Eccentric Sanders|eccentric sanders]]. Because they lack the additional turning motion though, they are more prone to leaving sanding marks on your workpiece if you're not careful.
Sheet sanders have a square orbiting pad that lets you reach into corners and remove a similar amount of material as [[Eccentric Sanders|eccentric sanders]]. Because they lack the additional turning motion though, they are more prone to leaving sanding marks on your workpiece if you're not careful.


We should soon be able to add two sheet sanders to our sanding corner, they just need to be commissioned.
See also:
* [http://www.holzwerken.net/Blog/Heiko-Rech/Eckig-oder-rund ''comparison of sheet vs. eccentric sanders on Holzwerken.net (DE)'']


{{Commissioning
|IssueNumber=
|Naming=done
|NamingComment=Bosch PSS 250 AE; SKIL 7210 "Fox 2in1"
|Picture=done
|PictureComment=
|Manual=done
|ManualComment=[https://www.manualslib.com/manual/1024645/Bosch-Pss-190-Ac.html Bosch], [https://www.skil.de/media/catalog/product/i/n/instrman_7210.pdf SKIL]
|Documentation=good enough as a start
|DocumentationComment=e.g. sheet sizes? method of sheet holding? dust collection?
|QR=
|QRComment=
|Introduction=done
|IntroductionComment=[[Handheld Sander Introduction]]
|Security=done
|SecurityComment=[[Lukas]]
|Test=done
|TestComment=Bosch works well, SKIL should be improved with a [[Shop Vac|shop vac]] adapter!
|OwnerValue=done
|OwnerValueComment=entered by [[Lukas]]
|Availability=
|AvailabilityComment=
}}


<br clear="all"/>
<br clear="all"/>
== Bosch PSS 250 AE ==
== Bosch PSS 250 AE ==
{{ToolInfoBox
{{MachineInfoBox
|tool name=Bosch PSS 250 AE
|machine name=Bosch PSS 250 AE
|image=Bosch PSS 250 AE.jpg
|image=Bosch PSS 250 AE.jpg
|used with=[[sandpaper]] - 93{{x}}185 mm (hook and loop)<br>or 93{{x}}230 mm (plain, clamped)
|used with=[[sandpaper]] - 93{{x}}185 mm (hook and loop)<br>or 93{{x}}230 mm (plain, clamped)
|location=[[Wood Workshop|wood workshop]]
|location=[[Location::Wood Workshop|wood workshop]]
|access=after [[Handheld Sander Introduction|personal introduction]]
|access=[[Handheld Sander Introduction|handheld sander introduction]]
|tutors=[[Lukas]]
|tutors=[[Tutor::User:Lukas|Lukas]]
|manual=[https://www.manualslib.com/manual/1024645/Bosch-Pss-190-Ac.html ManualsLib]
|manual=[https://www.manualslib.com/manual/1024645/Bosch-Pss-190-Ac.html ManualsLib]
|extrabox=yes
}}
}}
The Bosch PSS 250 AE can be used with hook-and-loop [[sandpaper]] strips, but regular ones can also be clamped in.
The Bosch PSS 250 AE can be used with hook-and-loop [[sandpaper]] strips, but regular ones can also be clamped in.
Line 58: Line 36:
<br clear=all>
<br clear=all>
== SKIL 7210 "Fox 2in1" ==
== SKIL 7210 "Fox 2in1" ==
{{ToolInfoBox
{{MachineInfoBox
|tool name=SKIL 7210 "Fox 2in1"
|machine name=SKIL 7210 "Fox 2in1"
|image=SKIL 7210.jpg
|image=SKIL 7210.jpg
|used with=[[sandpaper]] - 93{{x}}185 mm (hook and loop)
|used with=[[sandpaper]] - 93{{x}}185 mm (hook and loop)
|location=[[Wood Workshop|wood workshop]]
|location=[[Location::Wood Workshop|wood workshop]]
|access=after [[Handheld Sander Introduction|personal introduction]]
|access=[[Handheld Sander Introduction|handheld sander introduction]]
|tutors=[[Lukas]]
|tutors=[[Tutor::User:Lukas|Lukas]]
|manual=[https://www.skil.de/media/catalog/product/i/n/instrman_7210.pdf skil.de]
|manual=[https://www.skil.de/media/catalog/product/i/n/instrman_7210.pdf skil.de]
}}
}}
Line 70: Line 48:


This sander can only be used outside and with a dust mask at the moment, its bag only traps the relatively large dust particles! Perhaps this could be improved with a custom [[Shop Vac|shop vac]] adapter.
This sander can only be used outside and with a dust mask at the moment, its bag only traps the relatively large dust particles! Perhaps this could be improved with a custom [[Shop Vac|shop vac]] adapter.
<br clear=all>
== DeWalt DW411 ==
{{MachineInfoBox
|machine name=DeWalt DW411
|image=DeWalt DW411.JPG
|used with=[[sandpaper]] - 115{{x}}110 mm (with 8 holes)
|location=[[Location::Storage Room|storage room]] - may be [[borrowed]]
|access=[[Handheld Sander Introduction|handheld sander introduction]],<br>permission from {{inventory-manager}}
|tutors=[[Lukas]]
|manual=[https://www.manualslib.com/manual/814089/Dewalt-Dw411.html manualslib.com]
|extrabox=yes
}}
We got a DeWalt DW411 palm sander ''(Faustschleifer)'' without a dust bag. A [[Shop Vac|shop vac]] adapter should be made before using it inside!
 
Besides the [[dust]] issue, be aware that...
* there is no protection against accidental start (the button will stay at "1" when the sander is unplugged while running)
* holding the sander near its base gives control for details, but also shakes up your hand a lot more which quickly becomes tiring
 
Since we have multiple sheet sanders at the moment, this one is kept in storage as a backup but may be [[borrowed]] for private use over short periods of time - ask {{inventory-manager}} if you're interested! [[Category:Borrowable]]
 
''Once we do need to put the tool into a shared room, the only [[commissioning]] step left to do is printing its [[QR Code|QR code]].''
 


[[Category:Power Tools]]
[[Category:Sanders]]
[[Category:Sanders]]
[[Category:Woodworking]]
[[Category:Woodworking]]

Revision as of 22:30, 14 July 2021

MachineInfoBox

Sheet Sanders

Sheet sander motion.png
Synonyms: orbital finishing sanders;
DE: Schwingschleifer, Rutscher
Type: [[power sanders]]
Material: depends on sanding sheet (usually wood)
Used with: sandpaper
Location: wood workshop
Access Requirements: Handheld Sander Introduction
Tutors: Lukas
NitramLegov
Pakue
Johannes
Luzian
Keno
Sebastian
Jakob
Similar (More or Less): eccentric and other power sanders

[[MachineType::power sanders| ]]


Sheet sanders have a square orbiting pad that lets you reach into corners and remove a similar amount of material as eccentric sanders. Because they lack the additional turning motion though, they are more prone to leaving sanding marks on your workpiece if you're not careful.

See also:



Bosch PSS 250 AE

MachineInfoBox

Bosch PSS 250 AE

Bosch PSS 250 AE.jpg
Used with: sandpaper - 93 × 185 mm (hook and loop)
or 93 × 230 mm (plain, clamped)
Location: wood workshop
Access Requirements: Handheld Sander Introduction
Manual: ManualsLib
Tutors: Lukas
NitramLegov
Pakue
Johannes
Luzian
Keno
Sebastian
Jakob


The Bosch PSS 250 AE can be used with hook-and-loop sandpaper strips, but regular ones can also be clamped in.

It has a "microfilter" that reduces airborne dust, but you should ideally use a shop vac (will fit in combination with the rubber adapter in the sander's case) and/or go outside and it does not hurt to still protect yourself with a dust mask. The sandpaper should have the appropriate holes for dust extraction to work, of course!


SKIL 7210 "Fox 2in1"

MachineInfoBox

SKIL 7210 "Fox 2in1"

SKIL 7210.jpg
Used with: sandpaper - 93 × 185 mm (hook and loop)
Location: wood workshop
Access Requirements: Handheld Sander Introduction
Manual: skil.de
Tutors: Lukas
NitramLegov
Pakue
Johannes
Luzian
Keno
Sebastian
Jakob


The SKIL 7210 is a "multi" sander that can also be equipped with a delta sander-like tip - unfortunately, that part is not included with the one we have.

This sander can only be used outside and with a dust mask at the moment, its bag only traps the relatively large dust particles! Perhaps this could be improved with a custom shop vac adapter.

DeWalt DW411

MachineInfoBox

DeWalt DW411

DeWalt DW411.JPG
Used with: sandpaper - 115 × 110 mm (with 8 holes)
Location: storage room - may be borrowed
Access Requirements: Handheld Sander Introduction
Manual: manualslib.com
Tutors: Lukas
NitramLegov
Pakue
Johannes
Luzian
Keno
Sebastian
Jakob


We got a DeWalt DW411 palm sander (Faustschleifer) without a dust bag. A shop vac adapter should be made before using it inside!

Besides the dust issue, be aware that...

  • there is no protection against accidental start (the button will stay at "1" when the sander is unplugged while running)
  • holding the sander near its base gives control for details, but also shakes up your hand a lot more which quickly becomes tiring

Since we have multiple sheet sanders at the moment, this one is kept in storage as a backup but may be borrowed for private use over short periods of time - ask Patrick if you're interested!

Once we do need to put the tool into a shared room, the only commissioning step left to do is printing its QR code.