Handheld Routers: Difference between revisions

From CoMakingSpace Wiki

m (linked router bits)
m (switching to a machine and add location and tutors as SMW parameters)
Line 1: Line 1:
{{ToolInfoBox
{{MachineInfoBox
|tool name=''Routers''
|machine name=''Routers''
|image=Ferm FBF-1050E.JPG <!-- general graphic or animation would be nice here! -->
|image=Ferm FBF-1050E.JPG <!-- general graphic or animation would be nice here! -->
|synonyms=plunge routers, handheld routers;<br>DE: Oberfräsen, Handoberfräsmaschinen
|synonyms=plunge routers, handheld routers;<br>DE: Oberfräsen, Handoberfräsmaschinen
Line 6: Line 6:
|access=[[Handheld Router Introduction|handheld router introduction]]
|access=[[Handheld Router Introduction|handheld router introduction]]
|material=[[wood]]
|material=[[wood]]
|tutors={{£}}, [[User:NitramLegov/Tutor|Martin]]
|tutors=[[Tutor::User:Lukas|Lukas]], [[Tutor::User:NitramLegov/Tutor|Martin]]
|similar=[[CNC Router|CNC router]], [[Router Plane|router plane]]; [[Milling Table|milling table]], [[CNC Mill|CNC mill]]
|similar=[[CNC Router|CNC router]], [[Router Plane|router plane]]; [[Milling Table|milling table]], [[CNC Mill|CNC mill]]
|used with=[[Router Bits|router bits]]
|used with=[[Router Bits|router bits]]
Line 40: Line 40:


== Bosch POF 1200 AE==
== Bosch POF 1200 AE==
{{ToolInfoBox
{{MachineInfoBox
|tool name=Bosch POF 1200 AE
|machine name=Bosch POF 1200 AE
|image=POF 1200.JPG
|image=POF 1200.JPG
|access=[[Handheld Router Introduction|handheld router introduction]]
|access=[[Handheld Router Introduction|handheld router introduction]]
|location=[[Chop Saw Station|chop saw station]]
|location=[[Location::Chop Saw Station|chop saw station]]
|tutors={{£}}, [[User:NitramLegov/Tutor|Martin]]
|tutors=[[Tutor::User:Lukas|Lukas]], [[Tutor::User:NitramLegov/Tutor|Martin]]
|manual=[https://www.bosch-do-it.de/media/garden/gardenmedia/manuals/1178408_160992A201_201408pdf..pdf Bosch]
|manual=[https://www.bosch-do-it.de/media/garden/gardenmedia/manuals/1178408_160992A201_201408pdf..pdf Bosch]
}}
}}
Line 55: Line 55:
<br clear=all>
<br clear=all>
== KingCraft KBF-1050E ==
== KingCraft KBF-1050E ==
{{ToolInfoBox
{{MachineInfoBox
|tool name=KingCraft KBF-1050E
|machine name=KingCraft KBF-1050E
|image=Router_Table.JPG
|image=Router_Table.JPG
|access=[[Handheld Router Introduction|handheld router introduction]]
|access=[[Handheld Router Introduction|handheld router introduction]]
|location=[[Router Table|router table]]
|location=[[Location::Router Table|router table]]
|tutors={{£}}, [[User:NitramLegov/Tutor|Martin]]
|tutors=[[Tutor::User:Lukas|Lukas]], [[Tutor::User:NitramLegov/Tutor|Martin]]
|manual=[http://doc.ferm.com/Servotool/documents/826196%20Manual%20%200401-28.pdf ferm.com]
|manual=[http://doc.ferm.com/Servotool/documents/826196%20Manual%20%200401-28.pdf ferm.com]
}}
}}
Line 82: Line 82:


== Ferm FBF-1050E ==
== Ferm FBF-1050E ==
{{ToolInfoBox
{{MachineInfoBox
|tool name=Ferm FBF-1050E
|machine name=Ferm FBF-1050E
|image=Ferm FBF-1050E.JPG
|image=Ferm FBF-1050E.JPG
|access=[[Handheld Router Introduction|handheld router introduction]]
|access=[[Handheld Router Introduction|handheld router introduction]]
|location=[[Wood Workshop|wood workshop]]
|location=[[Location::Wood Workshop|wood workshop]]
|manual=[http://doc.ferm.com/item/P/PRM1005/PRM1005_MANUAL.pdf pdf]
|manual=[http://doc.ferm.com/item/P/PRM1005/PRM1005_MANUAL.pdf pdf]
}}
}}
Line 99: Line 99:
== Private Tools ==
== Private Tools ==
=== Einhell TE-RO 1255 E ===
=== Einhell TE-RO 1255 E ===
{{ToolInfoBox
{{MachineInfoBox
|tool name=Einhell TE-RO 1255 E
|machine name=Einhell TE-RO 1255 E
|image=Einhell router.JPG
|image=Einhell router.JPG
|access=ask nicely & [[Handheld Router Introduction|handheld router introduction]]
|access=ask nicely & [[Handheld Router Introduction|handheld router introduction]]
|location=[[Mitja]]'s CoMaking bench
|location=[[Mitja]]'s CoMaking bench
|tutors=[[Mitja]]
|tutors=[[Tutor::User:Mitja|MitjaMitja]]
|manual=[https://assets.einhell.com/manuals-pdf/900_398461/te-ro-1255-e.pdf pdf]
|manual=[https://assets.einhell.com/manuals-pdf/900_398461/te-ro-1255-e.pdf pdf]
}}
}}

Revision as of 20:45, 13 June 2019

MachineInfoBox

Routers

Ferm FBF-1050E.JPG
Synonyms: plunge routers, handheld routers;
DE: Oberfräsen, Handoberfräsmaschinen
Type: power tool
Material: wood
Used with: router bits
Access Requirements: Handheld Router Introduction
Tutors: Lukas
NitramLegov
Pakue
Johannes
Luzian
Keno
Utis
Similar (More or Less): CNC router, router plane; milling table, CNC mill


A router is basically a powerful motor spinning a sharp metal bit at high speeds. Read the manual before using and be aware of the difference between the regular "push" and the more dangerous "climb" cut!

Safety

Routers are very dangerous tools, make sure you have received the handheld router introduction in person and take time to think about what you are going to do!

Router Bits

(main article: Router Bits)

Router bits can get quite expensive, but good quality ones can be sharpened when they become dull.

Typical collet (Spannzangen) sizes are 6 and 8 mm.
A simple shared set of 8 mm router bits is available in the wood workshop. As always, report when broken and replace them accordingly.


Copying Rings

Copying rings can be used for template work and are more versatile (although a bit more complicated) than flush trim bits with a ball bearing that takes care of the copying. When working with a copying ring, the template has to be offset from the target shape by a few millimeters: offset = (outer coyping ring diameter - bit diameter)/2 [1]

Future Plans

Interesting Links


Bosch POF 1200 AE

MachineInfoBox

Bosch POF 1200 AE

POF 1200.JPG
Location: chop saw station
Access Requirements: Handheld Router Introduction
Manual: Bosch
Tutors: Lukas
NitramLegov
Pakue
Johannes
Luzian
Keno
Utis


We were given a Bosch POF 1200 AE that works very well except that it can't be moved up very far at the moment.

Not many accessories are included, though.



KingCraft KBF-1050E

MachineInfoBox

KingCraft KBF-1050E

Router Table.JPG
Location: router table
Access Requirements: Handheld Router Introduction
Manual: ferm.com
Tutors: Lukas
NitramLegov
Pakue
Johannes
Luzian
Keno
Utis


Martin brought a router which is attached to the router table.

We currently have 6 and 8 mm collets for it (an extra 8 mm one is in the storage room along with replacement carbon brushes).

The depth setting screw is very useful for fine adjustments, but when it is loose and the router is mounted upside down it can fall out because of the vibrations. Therefore, this screw should be used to hold the router in position under the router table instead of the clamping lever on the back. Unfortunately, one of the falls seems to have broken the handle off the screw, both parts are currently in the box with broken equipment on the ladder shelf.

Repairs & Upgrades

Watch out! This tool has been repaired for now, but may suffer another defect in the near future. If anything looks, feels or sounds wrong to you, do not use it and immediately talk to a tutor or manager!

  • 2018-11-25 (after approx. 5 uses of the router table; ask Lukas for more details)
    • cast metal "collar" discovered to be broken in several places, spindle locking button put back in position with a zip tie (epoxied to the collar so it can't slip off)
    • cut a longer thread into the depth setting screw so it can be tightened in any router position
  • 2019-3-27
    • previous hack broken a few days before as reported in issue #105
    • locking collar removed, 14 mm wrench added to the router table for locking


Ferm FBF-1050E

MachineInfoBox

Ferm FBF-1050E

Ferm FBF-1050E.JPG
Location: wood workshop
Access Requirements: Handheld Router Introduction
Manual: pdf
Tutors: Lukas
NitramLegov
Pakue
Johannes
Luzian
Keno
Utis


This router comes with 6 and 8 mm collets (Spannzangen). A few other accessories, including a parallel fence, can be found in its box.

A set of router bits is available with the router. As always, report when broken and replace them accordingly.

Past repairs:


Private Tools

Einhell TE-RO 1255 E

MachineInfoBox

Einhell TE-RO 1255 E

Einhell router.JPG
Location: Mitja's CoMaking bench
Access Requirements: Handheld Router Introduction
Manual: pdf
Tutors: Lukas
NitramLegov
Pakue
Johannes
Luzian
Keno
Utis


Mitja owns an Einhell router that you may be able to use for your projects if you ask him nicely.