Prusa i3 MK2S (1)

From CoMakingSpace Wiki

Revision as of 21:44, 6 November 2022 by NitramLegov (talk | contribs) (→‎Prusa i3 MK2S: assetid)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)


Prusa i3 MK2S (#1)

MachineInfoBox

Original Prusa i3 MK2S (#1)

Prusa i3 MK2S.JPG
Synonyms: "P1", Prusa i3 MK2 (nearly identical)
Type: 3D Printer
Material: plastic filament
Location: 3D Printing Area
Access Requirements: 3D Printer Introduction
Status: Operational
Firmware: https://www.prusa3d.com/drivers/
Software: Slic3r Prusa Edition
Manual: prusa3d.com
Tutors: Lukas
NitramLegov
Pakue
Mitja
Lmnl99
Johannes
Ciaran
Luzian
Leo
Narquadah
Kalunho
Björn




The Prusa i3 MK2S is our default 3D printer. We have five of them, named "P1" through "P5".

Please note that P1 has received an upgrade and now has a magnetic board.

In addition to receiving a personal introduction from one of the tutors, make sure that you have read the handbook and use the latest version of Slic3r available at the drivers and manuals page.

The build volume of this model is 250 × 210 × 200 mm.