Prusa i3 MK2S (1): Difference between revisions

Revision as of 12:37, 20 June 2018

MachineInfoBox Original Prusa i3 MK2S

Synonyms:	Prusa i3 MK2 (nearly identical)
Type:	3D printer
Material:	plastic filament
Location:	3D printer farm
Access Requirements:
Status:	[[Has InfoBox Status::see list]]
Firmware:	https://www.prusa3d.com/drivers/
Software:	Slic3r Prusa Edition
Manual:	prusa3d.com
Tutors:

The Prusa i3 MK2S is our default 3D printer in the 3D printer farm. We have five of them, named "P1" through "P5".

In addition to receiving a personal introduction from one of the tutors, make sure that you have read the handbook and use the latest version of Slic3r available at the drivers and manuals page.

exposed heated parts - may still be hot if the display is already turned off!
- the print head reaches temperatures up to 230 °C during operation
- the bed reaches temperatures up to 100 °C during operation
machine parts may rapidly change direction - do not reach in when a print is running!
machine may keep executing its commands after something went wrong
- every move is based on the initial homing ("zero-ing")
- no sensing of obstacles or current position!

MachineInfoBox Original Prusa i3 MK2S Multi Material

Type:	3D printer with multi material support
Material:	plastic filament
Location:	3D printer farm
Access Requirements:
Status:	[[Has InfoBox Status::see list]]
Firmware:	https://www.prusa3d.com/drivers/
Software:	Slic3r Prusa Edition
Manual:	prusa3d.com
Tutors:

@@ Line 33: / Line 33: @@
 {{MachineInfoBox
 |machine name=Original Prusa i3 MK2S Multi Material
-|image=
+|image=MultiMaterialPrinter.JPG
 |type=3D printer with multi material support
 |material=plastic [[filament]]