Prusa i3 MK2S (1): Difference between revisions

From CoMakingSpace Wiki

(Playing around with tutor logic)
mNo edit summary
Line 1: Line 1:
{{PAGENAME}}
{{MachineInfoBox
{{MachineInfoBox
|machine name=Original Prusa i3 MK2S
|machine name=Original Prusa i3 MK2S

Revision as of 19:55, 24 January 2022

MachineInfoBox

Original Prusa i3 MK2S

Prusa i3 MK2S.JPG
Synonyms: Prusa i3 MK2 (nearly identical)
Type: 3D printer
Material: plastic filament
Location: 3D printer farm
Access Requirements:
Status: [[Has InfoBox Status::see list]]
Firmware: https://www.prusa3d.com/drivers/
Software: Slic3r Prusa Edition
Manual: prusa3d.com
Tutors:


The Prusa i3 MK2S is our default 3D printer in the 3D printer farm. We have five of them, named "P1" through "P5".

In addition to receiving a personal introduction from one of the tutors, make sure that you have read the handbook and use the latest version of Slic3r available at the drivers and manuals page.

The build volume of this model is 250 × 210 × 200 mm.

Dangers

  • exposed heated parts - may still be hot if the display is already turned off!
    • the print head reaches temperatures up to 230 °C during operation
    • the bed reaches temperatures up to 100 °C during operation
  • machine parts may rapidly change direction - do not reach in when a print is running!
  • machine may keep executing its commands after something went wrong
    • every move is based on the initial homing ("zero-ing")
    • no sensing of obstacles or current position!

Maintenance

See 3D_Printer_Farm#Maintenance.

Multi-Material Printer

MachineInfoBox

Original Prusa i3 MK2S Multi Material

MultiMaterialPrinter.JPG
Type: 3D printer with multi material support
Material: plastic filament
Location: 3D printer farm
Access Requirements:
Status: [[Has InfoBox Status::see list]]
Firmware: https://www.prusa3d.com/drivers/
Software: Slic3r Prusa Edition
Manual: prusa3d.com
Tutors:


The printer "P6" has a multi-material upgrade!

In the slicer, please select "Original Prusa i3 MK2 Multi Material" as the printer.
Please ensure that the filament loaded into the printer matches the settings you have in the slicer, for example like this:
MultiMaterialSlicingExample.png

For each part in your model, you can assign a specific extruder. If you import your parts in a single STL file, try marking it and pressing the "Split" button in order to split it into multiple parts (it will for example split it into the bodies from Fusion 360). Prusa provides a few helpful links for Multi Material Printing:

Please read them while preparing for your first print.
In case you have a specific support Material (e.g. Soluble support), please see the settings at: Print Settings --> Multiple Extruders. Please note that Multi Material printing takes much longer than regular printing. After you exported the GCode, you can see the estimated printing time in the lower right corner.