Project:Roubo Workbench: Difference between revisions

From CoMakingSpace Wiki

m (refined link)
(added photo and some additional notes)
Line 1: Line 1:
{{ProjectInfoBox
{{ProjectInfoBox
|project title=Simple "Roubo" Style Workbench
|project title=Simple "Roubo" Style Workbench
|image=
|image=Roubo sketch.PNG
|status=in progress
|status=in progress
|date=Oct 2017
|date=Oct 2017
|initiator=[[Lukas]]
|initiator=[[Lukas]]
|team=
|team=
|materials=[[Wood]] (spruce/fir planks), [[Threaded Rods|threaded rods]],<br>[[Lock Nuts|lock nuts]], [[Wood Glue|wood glue]]
|materials=[[Wood]] (spruce planks), [[Threaded Rods|threaded rods]],<br>[[Lock Nuts|lock nuts]], [[Wood Glue|wood glue]]
|tools=10 mm [[Spade Drill Bits|spade drill bit]], 20 mm [[Forstner Bits|Forstner bit]], [[clamps]], [[plane]]
|tools=10 mm [[Spade Drill Bits|spade drill bit]], 20 mm [[Forstner Bits|Forstner bit]], 19 mm [[Auger Bits|auger bit]], [[clamps]], [[plane]]
|software=
|software=
|cost=approx. 50 € so far (very cheap wood...)
|cost=approx. 50 € so far (very cheap wood...)
Line 19: Line 19:
== Notes ==
== Notes ==
* final plate size: 1800{{x}}800{{x}}60 mm
* final plate size: 1800{{x}}800{{x}}60 mm
** made of ten 2000{{x}}80{{x}}60 mm spruce/fir planks
** made of ten 2000{{x}}80{{x}}60 mm spruce planks
** not [[Jointer|jointed]] - glue reinforced by three M8 [[Threaded Rods|threaded rods]]
** not [[Jointer|jointed]] - glue reinforced by three M8 [[Threaded Rods|threaded rods]]
** 10 mm holes for the rods, outmost planks counterbored with 20 mm [[Forstner Bits|Forstner bit]] to receive [[nuts]]
** 10 mm holes for the rods, outmost planks counterbored with 20 mm [[Forstner Bits|Forstner bit]] to receive [[nuts]]
*** counterbore should have been the first hole to drill...
*** counterbore should have been the first hole to drill...
* legs (800{{x}}100{{x}}80 mm spruce planks) will be connected to each other by a frame at the bottom, perhaps with a storage floor
** the bench may still have to be bolted to the wall for maximum stability, we'll see!
* holes for [[holdfasts]] will be added as needed, the first one was already drilled when the tenons on the legs needed to be cut




[[Category:Woodworking]]
[[Category:Woodworking]]
[[Category:Workbenches]]
[[Category:Workbenches]]

Revision as of 11:02, 4 October 2017

ProjectInfoBox

Simple "Roubo" Style Workbench

Roubo sketch.PNG
Status: in progress
Release Date: Oct 2017
Initiator: Lukas
Materials Used: Wood (spruce planks), threaded rods,
lock nuts, wood glue
Tools Used: 10 mm spade drill bit, 20 mm Forstner bit, 19 mm auger bit, clamps, plane
Approx. Cost: approx. 50 € so far (very cheap wood...)


drilling holes for the threaded rods with a simple fixture

A "Roubo" workbench a traditional French woodworking bench (Hobelbank) as described by André Roubo in the 18th century. It has many nice features and work holding options so we began building one.

While the following build is largely inspired by the old sketches, many features and construction techniques were chosen based on what was desired and possible at the time.

Notes

  • final plate size: 1800 × 800 × 60 mm
    • made of ten 2000 × 80 × 60 mm spruce planks
    • not jointed - glue reinforced by three M8 threaded rods
    • 10 mm holes for the rods, outmost planks counterbored with 20 mm Forstner bit to receive nuts
      • counterbore should have been the first hole to drill...
  • legs (800 × 100 × 80 mm spruce planks) will be connected to each other by a frame at the bottom, perhaps with a storage floor
    • the bench may still have to be bolted to the wall for maximum stability, we'll see!
  • holes for holdfasts will be added as needed, the first one was already drilled when the tenons on the legs needed to be cut