Project:Pirate Ship's Wheel

ProjectInfoBox Pirate Ship´s Wheel
Status:	in progress
Release Date:	(hopefully)July 2020
Initiator:	Martin
Materials Used:	Wood
Tools Used:	CNC Router, Handheld Router, Laser Cutter
Approx. Cost:	approx 20€ (mainly for the wood)

Idea

Martin´s niece owns a sandbox in the form of an old boat. Since she got a cabin built upon it to enable a pirate ship theme, the whole thing of course needed a proper ship´s wheel!

Build

Since the cabin was made from spruce wood, the ship´s wheel was made from the same kind of wood in order to fit. You can get pieces of this at Bauhaus for a reasonable price.

Overall Cut: CNC Router

In order to ensure a proper design, the CNC Router has been used to cut the overall design out of the workpiece:

• 

  Perparing the job in Fusion

• 

  After CNC Routing

Tune Edges: Handheld Router

Since the CNC Router has been cutting sharp edges, these needed to get rounded. Using the handheld router for this was the fastest and easiest option:

• 

  Before/After

• 

  Always secure your workpiece!

• 

  Finished edges

Engrave Treasures and Skulls: Laser Cutter

Since this ship wheel is dedicated to be used at a pirate ship, it needs to get some skulls and treasures engraved. Our laser cutter has different options for burning images into wood, which needed to be compared to each other:

It was decided to use the cut treasure (below) and the engraved skull (on top)