Project:Pegboard: Difference between revisions

From CoMakingSpace Wiki

(Pegboard notes)
 
(Add photos)
Line 1: Line 1:
{{ProjectInfoBox
{{ProjectInfoBox
|project title=Pegboard
|project title=Pegboard
|image=
|image=Pegboard_mounted.jpg
|status=in progress
|status=in progress
|date=March 2018
|date=March 2018
Line 19: Line 19:


Peg attachments can be 3D printed, designs that work well will be collected here.
Peg attachments can be 3D printed, designs that work well will be collected here.
== Gallery ==
[[File:Pegboard_drilling_holes.jpg|200px|thumb|left|Drilling holes in a sheet of MDF]]

Revision as of 13:18, 24 March 2018

ProjectInfoBox

Pegboard

Pegboard mounted.jpg
Status: in progress
Release Date: March 2018
Initiator: Mitja
Materials Used: MDF, Filament
Tools Used: CNC Router, 3D Printer
Software Used: Fusion 360
Approx. Cost: < 10 EUR


Typical US pegboards have 1/4 inch diameter holes, with a spacing of 1 inch. These holes can be easily drilled on our Workbee CNC.

Our locker doors allow mounting a sheet of 95cm x 35cm with a small cutout of 5cm x 5cm in the middle of the long edge.

Attachments

Peg attachments can be 3D printed, designs that work well will be collected here.

Gallery

Drilling holes in a sheet of MDF