Plenum/Meeting minutes/2019-04-10

From CoMakingSpace Wiki

Revision as of 16:58, 8 April 2019 by Lukas (talk | contribs) (→‎Topics: Laser Cutter (see mailing list in a few minutes))

Head

Idea/Overview: Plenum

Date/Time: 2019-4-10, 20:00
Attending Managers:
Attending Members:

Topics

Here's the list so far - please don't hesitate to add more! If you won't be able to attend, you can add your comments here or in the discussion to take part anyway :-)

Recap of the last plenum

Laser Cutter

We will very soon be "between lasers" again - the loaned machine is leaving us, we should discuss the next options!

Please add to this list if you already know something, we will then go over it together:

  • loan the "Wanderlaser" from cameo/Verbund offener Werkstätten
    • nearly identical to the last one, so we'd be quick to commission it
    • limited to just six weeks, costs something like 450 € plus transportation
  • buy a machine of our own - will be much more expensive, but we'd have it "forever"
    • Mr. Beam
      • diode-powered (5 W) - not much cutting ability but nice for engraving
      • the current model II costs about 3000 € (plus 600 for the air filter)
      • we might be able to get a used one for less
    • FabCreator FabCore (40 W) or FabPro (100 W)
      • "coming soon summer 2019", no pricing published yet
  • more ideas very welcome!

New (and newly available) tools at the space

=> also see "Wish List"

Collaboration possibilities

Do-something days

Current projects that are looking for collaborators

Issues

closed issues since the last plenum
new issues since the last plenum

Wiki

Area Patron Update

Area Patron Update Members Feedback
Electronics Bench Johannes any update? any feedback/thanks?
3D Printer Farm Luca any update? Question: Is there any update on Issue 93?

Who else would like to become an Area Patron (Eckpate)?

Seminar Ideas

In the January Plenum, we decided that we would like to have at least one seminar per month. This worked out in the first three months, but so far, nothing more has been organized.
We should plan the next months.

Ideas can be found on Seminar Ideas. But maybe the Plenum has other ideas or somebody in the Plenum wants to create an additional Seminar!

open discussion (general improvements, etc.)

What did I do since the last plenum?

What am I planning to do until the next plenum?

What went wrong?

  • The SD-Card Reader for the 3D Printers disappeared. Apparently, this was noticed during the weekend by Luca and Sbillaudelle during the weekend of March 23rd and 24th. However, no issue was opened and nothing was sent through the ML.

What went well?

What should get done at the space (new issues)?

Next Meeting