Plastic Shredder Introduction

From CoMakingSpace Wiki

Revision as of 17:23, 18 April 2022 by NitramLegov (talk | contribs) (Creation of the stub)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

This page is INCOMPLETE and still missing some important information before it can be used as a resource. Please use the "Discussion" feature above or talk to one of the tutors if you would like to help improve it. Thanks!



This is the content required for an introduction to our Plastic Shredder - reading this does NOT replace the mandatory session with a tutor! It will make it a lot quicker though ;-)

If you need this introduction, please reach out to the following tutors:

Let's begin! First off, make sure you have read the machine's <MANUAL>.


Safety

Personal protection: Protection - goggles.svg

Dangers Precautions
<danger 1> <precaution 1>
<danger 2> <precaution 2> [...]

Suggested Reading

Besides these safety notes, you should read <...>

Demonstration

The tutor will show you these steps in detail:

  • <...>