Network: Difference between revisions
From CoMakingSpace Wiki
NitramLegov (talk | contribs) (Added DoorBell and LaserCutter) |
(→Internal Network: linked related projects/equipment pages) |
||
| Line 22: | Line 22: | ||
|192.168.1.4 || Raspberry Pi controlling the [[CNC Router]] | |192.168.1.4 || Raspberry Pi controlling the [[CNC Router]] | ||
|- | |- | ||
|192.168.1.5 || ESP8266 at the | |192.168.1.5 || ESP8266 at the [[Flip Dot Display]] | ||
|- | |- | ||
|192.168.1.6 || ESP8266 at the | |192.168.1.6 || ESP8266 at the [[Project:Enhanced Door Bell|Door Bell]] | ||
|- | |- | ||
|192.168.1.20 || | |192.168.1.20 || [[Laser Cutter]] | ||
|- | |- | ||
|192.168.1.6 - 192.168.1.99 || Open for further static services | |192.168.1.6 - 192.168.1.99 || Open for further static services | ||
Revision as of 23:00, 2 December 2018
The network at the CoMakingSpace is built up as follows:
Internet ---> 1&1 Router ---> Netgear WNDR3700v4 (Freifunk) ---> TP-Link WDR4900 V1.3 (OpenWRT, NATting Freifunk to internal network)
Internet Connection
In order to connect to the internet, you can use SSID freifunk-rhein-neckar.de
Internal Network
In order to connect to the internal network of the CoMakingSpace, please use SSID "CoMakingSpace". The key can be found in the common room.
DHCP is configures as follows:
| IP | Host |
|---|---|
| 192.168.1.1 | TP-Link WDR4900 |
| 192.168.1.2 | Raspberry Pi (next to the sound system) |
| 192.168.1.3 | Laserjet Printer |
| 192.168.1.4 | Raspberry Pi controlling the CNC Router |
| 192.168.1.5 | ESP8266 at the Flip Dot Display |
| 192.168.1.6 | ESP8266 at the Door Bell |
| 192.168.1.20 | Laser Cutter |
| 192.168.1.6 - 192.168.1.99 | Open for further static services |
| 192.168.1.100 - 192.168.1.250 | IPs assigned by DHCP |
| 192.168.1.255 | Broadcast address |
Within the internal network, the following services are provided:
| Service | Host-IP | Hostname | Port |
|---|---|---|---|
| Mopidy (MPD Daemon) | 192.168.1.2 | comakingcontroller | 6600 |
| Mopidy (Webinterface) | 192.168.1.2 | comakingcontroller | 8888 |
| SSH | 192.168.1.2 | comakingcontroller | 22 |
| Printing | 192.168.1.3 | laserjet8150 | 631 |
| CNCjs | 192.168.1.4 | comakingcnc | 8080 |
The static IPs will be assigned by the TP-Link WDR4900. If you want to add a service with a static IP please ask one of the TP-Link WDR4900 administrators to add your service and don't just grab a static IP.
Configuration Changes
- If you need to change settings for the Netgear Router (providing the Freifunk network), please contact the management
- For changing settings on the Raspberry Pi, please contact the management, Martin or Olaf
- For changing settings on the TP-Link WDR4900, please contact the management or Olaf
