Micrometer Screw: Difference between revisions
(created page with instruction) |
NitramLegov (talk | contribs) (some wording) |
||
| Line 2: | Line 2: | ||
|tool name=Micrometer screw | |tool name=Micrometer screw | ||
|image=Micrometer25.jpg | |image=Micrometer25.jpg | ||
|synonyms=micrometer screw gauge | |synonyms=micrometer screw gauge <br/>DE: Mikrometerschraube, Bügelmessschraube | ||
|type=measuring | |type=measuring | ||
|material= | |material= | ||
| Line 14: | Line 14: | ||
}} | }} | ||
== Should I | == Should I Use It? == | ||
This high precision measuring instrument is very sensitive and isn't very versatile or practical compared to a [[caliper]]. The upside to this tool is its precision, up to 1/1000 of a millimeter depending on the specific model. The downsides are the small measuring range (25mm max), the high cost and it takes a lot of time to screw it open so depending on what your measuring it usually doesn't make sens to use this tool. Mostly it is used to measure if the thickness of s.t. is consistent or to take the exact diameter of a turned peace to make adjustments. | This high precision measuring instrument is very sensitive and isn't very versatile or practical compared to a [[caliper]]. The upside to this tool is its precision, up to 1/1000 of a millimeter depending on the specific model. The downsides are the small measuring range (25mm max), the high cost and it takes a lot of time to screw it open so depending on what your measuring it usually doesn't make sens to use this tool. Mostly it is used to measure if the thickness of s.t. is consistent or to take the exact diameter of a turned peace to make adjustments. | ||
== How to | == How to Use It == | ||
Place the object you want to measure between the anvil and spindle | #Place the object you want to measure between the anvil and spindle | ||
#Turn the milled knob until the spindle and anvil lightly touch the object. '''Do not over tighten the spindle.''' <br/> | |||
In order not to damage the spindle and/or get distorted readings, do not turn on the spindle directly but rather use the milled knob. It has a constant abound of slack and will therefore not allow you to over tighten it. Newer models have a ratchet to allow for even more precision. | |||
[[File:Micrometer no zero error.gif|thumb|left|how to get the reading]] | [[File:Micrometer no zero error.gif|thumb|left|how to get the reading]] | ||
Revision as of 20:07, 17 November 2018
| ToolInfoBox Micrometer screw | |
|---|---|
| |
| Synonyms: | micrometer screw gauge DE: Mikrometerschraube, Bügelmessschraube |
| Type: | measuring |
| Location: | Metal Workshop |
| Access Requirements: | upon reading |
| Tutors: | Luzian |
| Similar (More or Less): | Calipers |
Should I Use It?
This high precision measuring instrument is very sensitive and isn't very versatile or practical compared to a caliper. The upside to this tool is its precision, up to 1/1000 of a millimeter depending on the specific model. The downsides are the small measuring range (25mm max), the high cost and it takes a lot of time to screw it open so depending on what your measuring it usually doesn't make sens to use this tool. Mostly it is used to measure if the thickness of s.t. is consistent or to take the exact diameter of a turned peace to make adjustments.
How to Use It
- Place the object you want to measure between the anvil and spindle
- Turn the milled knob until the spindle and anvil lightly touch the object. Do not over tighten the spindle.
In order not to damage the spindle and/or get distorted readings, do not turn on the spindle directly but rather use the milled knob. It has a constant abound of slack and will therefore not allow you to over tighten it. Newer models have a ratchet to allow for even more precision.
