Metal Lathes: Difference between revisions

From CoMakingSpace Wiki

m (EN Wikipedia link)
(added photo & info about lubrication)
Line 1: Line 1:
{{MachineInfoBox
{{MachineInfoBox
|machine name=Metalworking Lathe
|machine name=Myford ML7
|image=
|image=lathe restoration.JPG
|synonyms="metal lathe", engine lathe; DE: "Drehbank",<br>Zug- und Leitspindeldrehmaschine
|synonyms="metal lathe", engine lathe; DE: "Drehbank",<br>Zug- und Leitspindeldrehmaschine
|location=[[Metal Workshop|metal workshop]]
|location=[[Metal Workshop|metal workshop]]
Line 8: Line 8:
|tutors=''TBD''
|tutors=''TBD''
}}
}}
We were generously given a Myford (ML 7?) metalworking lathe.
We were generously given a ''Myford ML7'' metalworking lathe.


'''It is currently being restored''', more information will be added as work progresses!
'''It is currently being restored (see [https://github.com/comakingspace/do-something/issues/4 corresponding issue])''', more information will be added as work progresses!
 
== Lubrication ==
There are various oil nipples (''2 B.A.'' thread) all over the machine and two sight-feed lubricators (a.k.a. drip feed oilers) above the headstock spindle bearings.
 
The [https://www.myford.co.uk/acatalog/VG32-LUBRICATING-OIL---ESSO-NUTO-32---1-LITRE-662.html manufacturer's recommendation] is "Esso Nuto 32" gear oil but we are using a more viscous "90" oil as that was available to us and two trusted sources ensured us it should work just fine.
 
'''We are still in need of an oil gun (something like [https://www.myford.co.uk/acatalog/MYFORD-OIL-GUN--15472-1770.html#SID=239 this]) to lubricate through the oil nipples!'''


== Further Reading ==
== Further Reading ==
* [https://www.myford.co.uk/acatalog/Myford_ML7.html manufacturer's website (EN)]
* [https://de.m.wikipedia.org/wiki/Leit-_und_Zugspindeldrehmaschine Wikipedia (DE)]
* [https://de.m.wikipedia.org/wiki/Leit-_und_Zugspindeldrehmaschine Wikipedia (DE)]
* [https://en.m.wikipedia.org/wiki/Metal_lathe Wikipedia (EN)]
* [https://en.m.wikipedia.org/wiki/Metal_lathe Wikipedia (EN)]
Line 18: Line 26:


[[Category:Metalworking]]
[[Category:Metalworking]]
[[Category:Turning]]

Revision as of 03:02, 13 December 2017

MachineInfoBox

Myford ML7

Lathe restoration.JPG
Synonyms: "metal lathe", engine lathe; DE: "Drehbank",
Zug- und Leitspindeldrehmaschine
Location: metal workshop
Access Requirements: Metal Lathe Introduction
Status: being commissioned
Tutors: Pakue
Johannes
Luzian


We were generously given a Myford ML7 metalworking lathe.

It is currently being restored (see corresponding issue), more information will be added as work progresses!

Lubrication

There are various oil nipples (2 B.A. thread) all over the machine and two sight-feed lubricators (a.k.a. drip feed oilers) above the headstock spindle bearings.

The manufacturer's recommendation is "Esso Nuto 32" gear oil but we are using a more viscous "90" oil as that was available to us and two trusted sources ensured us it should work just fine.

We are still in need of an oil gun (something like this) to lubricate through the oil nipples!

Further Reading