Lathe Tools: Difference between revisions

Latest revision as of 00:55, 22 February 2022

ToolInfoBox Tool Bits

Synonyms:	DE: Drehmeißel, Drehstähle, Plandrehmeißel, Längsdrehmeißel
Type:	turning tools
Used with:	metal lathe
Location:	metal workshop
Tutors:	Patrick
Similar (More or Less):	woodturning tools

Tool bits are the "cutters" you need to install on the metal lathe to remove material.

The toolholder can holt tool bits between 8 and 12 mm.

Centers

ToolInfoBox Center at tail stock

Synonyms:	DE: Rollkörner
Type:	turning tools
Used with:	metal lathe
Location:	metal workshop

The center at the tail stock is used when working with large workpieces

ToolInfoBox Center drill

Synonyms:	DE: Zentrierbohrer
Type:	turning tools
Used with:	metal lathe
Location:	metal workshop

Drehzahl beim Plan-/Längsdrehmeißel: Vc/π*Durchmesser

Rollkörner max 1500/min

Zentrierbohrer ca. 1500/min

@@ Line 1: / Line 1: @@
 {{ToolInfoBox
 |tool name=Tool Bits
+|german=Drehmeißel
 |image=Lathe Tool bild 1.jpg
-|synonyms=DE: Drehmeißel, Drehstähle
+|synonyms=DE: Drehmeißel, Drehstähle,<br>Plandrehmeißel, Längsdrehmeißel
+|type=[[turning]] tools
+|material=
+|used with=[[Metal Lathe|metal lathe]]
+|location=[[Location::Metal Workshop|metal workshop]]
+|access=
+|tutors=[[Tutor::User:Pakue|Patrick]]
+|manual=
+|donation=
+|similar=[[Woodturning Tools|woodturning tools]]
+}}
+Tool bits are the "cutters" you need to install on the [[Metal Lathe|metal lathe]] to remove material.
+[[File:Lathe Drehmeißelaufnahme.jpg|200px|thumb|left|The toolholder can holt tool bits between 8 and 12 mm.]]
+[[File:Drehmeißel eingespant.jpg|500px]]
+<br clear="all"/>
+== Centers ==
+{{ToolInfoBox
+|tool name= Center at tail stock
+|image=Rollkörnerbild1.jpg
+|synonyms=DE: Rollkörner
+|type=[[turning]] tools
+|material=
+|used with=[[Metal Lathe|metal lathe]]
+|location=[[Metal Workshop|metal workshop]]
+|access=
+|tutors=
+|manual=
+|donation=
+|similar=
+|extrabox=yes
+}}
+[[File:Rollkörnerbild2.jpg|500px|thumb|left|The center at the tail stock is used when working with large workpieces]]
+<br clear="all"/>
+{{ToolInfoBox
+|tool name=Center drill
+|image=Zentrierbohrer.jpg
+|synonyms=DE: Zentrierbohrer
 |type=[[turning]] tools
 |material=
@@ Line 8: / Line 50: @@
 |location=[[Metal Workshop|metal workshop]]
 |access=
-|tutors=[[Patrick]]
+|tutors=
 |manual=
 |donation=
 |similar=
+|extrabox=yes
 }}
-Tool bits are the "cutters" you need to install on the [[Metal Lathe|metal lathe]] to remove material.
-[[File:Lathe Drehmeißelaufnahme.jpg|200px|thumb|left|Drehmeißel Aufnahme nimmt Drehmeißel von □8mm bis □12mm]]
+Drehzahl beim Plan-/Längsdrehmeißel: Vc/π*Durchmesser
+Rollkörner max 1500/min
+Zentrierbohrer ca. 1500/min
+<br clear="all"/>
 == Further Reading ==
 * Wikipedia
-** [https://de.m.wikipedia.org/wiki/Drehmei%C3%9Fel ''DE: Drehmeißel'']
+** [https://de.wikipedia.org/wiki/Drehmei%C3%9Fel ''DE: Drehmeißel'']
+** [https://en.wikipedia.org/wiki/Lathe ''EN: Lathe'']
+** [https://en.wikipedia.org/wiki/Tool_bit ''EN: Tool bit'']
+** [https://en.wikipedia.org/wiki/Lathe_center ''EN: Lathe Center'']
 [[Category:Turning]]