Jointer-Planer Introduction: Difference between revisions

From CoMakingSpace Wiki

(rough structure, linked wiki page & manual)
(not to be used alone, never remove blade guard & how to set it)
Line 10: Line 10:
Let's begin! First off, make sure you have read the machine's manual ([http://maschinen.felder-gruppe.at/uploads/document/01431_504010-901_01_1202_HA_BA_A3-26_A3-31_A3-41_GER_Lo.pdf felder-gruppe.at (DE)], [http://maschinen.felder-gruppe.at/uploads/document/Manual_A3-26_A3-31_A3-41_EUS_enc.pdf (EN)])
Let's begin! First off, make sure you have read the machine's manual ([http://maschinen.felder-gruppe.at/uploads/document/01431_504010-901_01_1202_HA_BA_A3-26_A3-31_A3-41_GER_Lo.pdf felder-gruppe.at (DE)], [http://maschinen.felder-gruppe.at/uploads/document/Manual_A3-26_A3-31_A3-41_EUS_enc.pdf (EN)])


This is one of those machines that can cause very serious injuries when something goes wrong, so ''do not use if you are alone in the Space'''.


== Safety ==
== Safety ==
Line 18: Line 19:
! Dangers !! Precautions
! Dangers !! Precautions
|-
|-
| <danger 1> || <precaution 1>
| radidly revolving knives - exposed at the top (jointer) ||  
* only expose as much of the blade as needed
* never remove the blade guard!
|-
| ''kickback'' ||
* [[Push Blocks|push blocks]] for the jointer require a "lip" that grabs the end of the board - friction-pushing on top is not sufficient
|-
|-
| <danger 2> || <precaution 2> [...]
| <danger 2> || <precaution 2> [...]
Line 28: Line 34:
== Demonstration ==
== Demonstration ==
The tutor will show you these steps in detail:
The tutor will show you these steps in detail:
* how to use the blade guard ''(Schutzbrücke)'' on the jointer<sup> [https://www.youtube.com/watch?v=NhnIqY3Fqqg&t=4m59s ''DE video'']</sup>
** to joint the board's wide faces: covering the entire blade, raised just enough for the board to fit under it
** to joint a board's narrow sides: lowered all the way, moved from the fence just enough for the board to fit between
* <...>
* <...>


[[Category:Introductions]]
[[Category:Introductions]]

Revision as of 08:26, 27 June 2020

This page is INCOMPLETE and still missing some important information before it can be used as a resource. Please use the "Discussion" feature above or talk to one of the tutors if you would like to help improve it. Thanks!



helpful links:



This is the content required for an introduction to our jointer-planer combination machine - reading this does NOT replace the mandatory session with a tutor! It will make it a lot quicker though ;-)

Let's begin! First off, make sure you have read the machine's manual (felder-gruppe.at (DE), (EN))

This is one of those machines that can cause very serious injuries when something goes wrong, so do not use if you are alone in the Space'.

Safety

Personal protection: Protection - goggles.svg

Dangers Precautions
radidly revolving knives - exposed at the top (jointer)
  • only expose as much of the blade as needed
  • never remove the blade guard!
kickback
  • push blocks for the jointer require a "lip" that grabs the end of the board - friction-pushing on top is not sufficient
<danger 2> <precaution 2> [...]

Suggested Reading

Besides these safety notes, you should read <...>

Demonstration

The tutor will show you these steps in detail:

  • how to use the blade guard (Schutzbrücke) on the jointer DE video
    • to joint the board's wide faces: covering the entire blade, raised just enough for the board to fit under it
    • to joint a board's narrow sides: lowered all the way, moved from the fence just enough for the board to fit between
  • <...>