Difference between revisions of "Jointer-Planer Introduction"

From CoMakingSpace Wiki
Jump to navigation Jump to search
(just "links" section from the machine page for now :-P)
 
(not to be used alone, never remove blade guard & how to set it)
(One intermediate revision by the same user not shown)
Line 1: Line 1:
 
{{incomplete}}
 
{{incomplete}}
 
  
 
helpful links:
 
helpful links:
 
* [https://www.youtube.com/watch?v=NhnIqY3Fqqg&t=4m59s ''video by Heiko Rech (DE)''] with important safety information we can use to define the introduction
 
* [https://www.youtube.com/watch?v=NhnIqY3Fqqg&t=4m59s ''video by Heiko Rech (DE)''] with important safety information we can use to define the introduction
 +
 +
 +
----
 +
This is the content required for an introduction to our [[Jointer-Planer|jointer-planer]] combination machine - '''reading this does NOT replace the mandatory session with a [[tutor]]!''' It will make it a lot quicker though ;-)
 +
 +
Let's begin! First off, make sure you have read the machine's manual ([http://maschinen.felder-gruppe.at/uploads/document/01431_504010-901_01_1202_HA_BA_A3-26_A3-31_A3-41_GER_Lo.pdf felder-gruppe.at (DE)], [http://maschinen.felder-gruppe.at/uploads/document/Manual_A3-26_A3-31_A3-41_EUS_enc.pdf (EN)])
 +
 +
This is one of those machines that can cause very serious injuries when something goes wrong, so ''do not use if you are alone in the Space'''.
 +
 +
== Safety ==
 +
[[PPE|Personal protection]]: <!-- add symbols here, e.g.: --> [[File:Protection - goggles.svg|50px]]
 +
 +
{| class="wikitable"
 +
|-
 +
! Dangers !! Precautions
 +
|-
 +
| radidly revolving knives - exposed at the top (jointer) ||
 +
* only expose as much of the blade as needed
 +
* never remove the blade guard!
 +
|-
 +
| ''kickback'' ||
 +
* [[Push Blocks|push blocks]] for the jointer require a "lip" that grabs the end of the board - friction-pushing on top is not sufficient
 +
|-
 +
| <danger 2> || <precaution 2> [...]
 +
|}
 +
 +
== Suggested Reading ==
 +
Besides these safety notes, you should read <...>
 +
 +
== Demonstration ==
 +
The tutor will show you these steps in detail:
 +
* how to use the blade guard ''(Schutzbrücke)'' on the jointer<sup> [https://www.youtube.com/watch?v=NhnIqY3Fqqg&t=4m59s ''DE video'']</sup>
 +
** to joint the board's wide faces: covering the entire blade, raised just enough for the board to fit under it
 +
** to joint a board's narrow sides: lowered all the way, moved from the fence just enough for the board to fit between
 +
* <...>
 +
 +
[[Category:Introductions]]

Revision as of 09:26, 27 June 2020

This page is INCOMPLETE and still missing some important information before it can be used as a resource. Please use the "Discussion" feature above or talk to one of the tutors if you would like to help improve it. Thanks!


helpful links:



This is the content required for an introduction to our jointer-planer combination machine - reading this does NOT replace the mandatory session with a tutor! It will make it a lot quicker though ;-)

Let's begin! First off, make sure you have read the machine's manual (felder-gruppe.at (DE), (EN))

This is one of those machines that can cause very serious injuries when something goes wrong, so do not use if you are alone in the Space'.

Safety

Personal protection: Protection - goggles.svg

Dangers Precautions
radidly revolving knives - exposed at the top (jointer)
  • only expose as much of the blade as needed
  • never remove the blade guard!
kickback
  • push blocks for the jointer require a "lip" that grabs the end of the board - friction-pushing on top is not sufficient
<danger 2> <precaution 2> [...]

Suggested Reading

Besides these safety notes, you should read <...>

Demonstration

The tutor will show you these steps in detail:

  • how to use the blade guard (Schutzbrücke) on the jointer DE video
    • to joint the board's wide faces: covering the entire blade, raised just enough for the board to fit under it
    • to joint a board's narrow sides: lowered all the way, moved from the fence just enough for the board to fit between
  • <...>