Jointer-Planer: Difference between revisions

From CoMakingSpace Wiki

(commissioning; moving "links" to beginning introduction page)
(safety to-dos)
Line 32: Line 32:
|IntroductionComment=[[Jointer-Planer Introduction]]
|IntroductionComment=[[Jointer-Planer Introduction]]
|Security=
|Security=
|SecurityComment=
|SecurityComment=printed manual needs to be kept at the machine, [[Push Blocks|push blocks]] need to be adapted with pins that fall down behind the workpiece (and/or make a new one with a lip)
|Test=
|Test=
|TestComment=
|TestComment=

Revision as of 07:30, 12 July 2020

MachineInfoBox

Hammer A3-31

Machine-default.png
Synonyms: planer-thicknesser, power jointer, thickness planer;
DE: Abricht- und Dickenhobelmaschine, "Abrichte", "Dickte"
Material: naturally structured wood
(not more engineered than glued laminated timber!)
Location: in transit
Access Requirements: Jointer-Planer IntroductionSome use of "" in your query was not closed by a matching "".
Status: [[Has InfoBox Status::in commissioning]]
Manual: felder-gruppe.at (DE), (EN)
Tutors: Lukas
Pakue
Sebastian
LoewensteinSome use of "" in your query was not closed by a matching "".
Similar (More or Less): jointer plane, planer


A jointer is used for straightening the narrow sides of wooden boards which is necessary for panel glue-ups and some kinds of joinery. It basically consists of a flat surface with a slightly protruding cutting drum at the center.

We chose to get a combination jointer/planer to save valuable space: thanks to the second flat surface under this cutting drum, you can also thickness boards with this machine!

This tool is not ready for use yet since not all commissioning steps have been completed. The process is not yet tracked on GitHub. Feel free to contribute to making it usable, any help is very welcome!

Task comment Status
Name the tool: - done
Take a picture - pending
Find the manual as PDF felder-gruppe.at (DE), (EN) done
Documentation this page, status: in commissioning pending
Print QR-Code use the wikicrawler pending
Introduction Jointer-Planer Introduction pending
Security Check printed manual needs to be kept at the machine, push blocks need to be adapted with pins that fall down behind the workpiece (and/or make a new one with a lip) pending
Test to be done or witnessed by a manager pending
tool's name, owner and approx. value provide to Patrick for inventorization pending
Last step: make it available physically and in the wiki - then delete this template pending



Alternatives