|
|
| Line 1: |
Line 1: |
| ''(deutsche Version: [[Handbohrmaschinen-Einweisung]] - Änderungen wenn möglich auch dort eintragen!)''
| | #REDIRECT [[Drill_Introduction]] |
| | |
| This is the content required for an introduction to our handheld power [[drills]] (including [[Cordless Drills|cordless drills]], [[Impact Drills|impact drills]] and [[Rotary Hammer|rotary hammer]], but NOT the [[Drill Press|drill press]] or [[Rotary Tool|rotary tool]]) - '''reading this does NOT replace the mandatory session with a [[tutor]]!''' It will make it a lot quicker though ;-)
| |
| | |
| Let's begin! First off, make sure you have read the machine's manual, if available (check its "InfoBox" in the wiki for instructions how to find it).
| |
| | |
| == Safety ==
| |
| === Dangers ===
| |
| * exposed & rapidly spinning chucks
| |
| * possible kickback due to a [[Drill Bits|drill bit]] that binds with the material
| |
| | |
| === Precautions ===
| |
| * wear [[Personal Protection|personal protection]] but '''not''' [[gloves]], they could get caught!
| |
| * stay clear of the chuck when in operation - use a secondary handle if possible
| |
| * make sure the drill can't accidentally turn on before changing a bit or touching the chuck for any other reason
| |
| * be prepared for sudden movements of the tool or your workpiece, especially when using large diameter drill bits or [[Hole Saw|hole saws]]
| |
| ** firmly hold the tool's handle(s) and secure your workpiece with [[clamps]] or in a [[vise]]
| |
| | |
| == Suggested Reading ==
| |
| Besides these safety notes, you should read about the different [[Drill Bits|drill bits]] to know what you're doing! '''Different materials usually require different bits, and the drilling speed depends on the bit as well as the type of material.'''
| |
| | |
| | |
| [[Category:Introductions]]
| |
