Festool CTM26 E AC (1): Difference between revisions

From CoMakingSpace Wiki

m (NitramLegov moved page Festool CTM26 E AC to Festool CTM26 E AC - 1 without leaving a redirect: New Machine Structure)
m (assetid)
Line 1: Line 1:
== Festool CTM26 E AC ==
== Festool CTM26 E AC (#1) ==
{{MachineInfoBox
{{MachineInfoBox
|machine name=Festool CTM26 E AC
|machine name=Festool CTM26 E AC (#1)
|german=Staubsauger
|german=Staubsauger
|type=Shop Vac
|type=Shop Vac
Line 9: Line 9:
|material=dry dirt in its usual setup,<br>'''wet dirt only with special bag'''
|material=dry dirt in its usual setup,<br>'''wet dirt only with special bag'''
|manual=[https://www.libble.de/festool-ctm-26-e-ac/p/470124/ libble.de]
|manual=[https://www.libble.de/festool-ctm-26-e-ac/p/470124/ libble.de]
|assetid=21
}}
}}
The two large Festool shop vacs can also be used as an extension cord of sorts and supports continuous (manual) or automatic (depending on the connected tool) action.
The two large Festool shop vacs can also be used as an extension cord of sorts and supports continuous (manual) or automatic (depending on the connected tool) action.

Revision as of 21:34, 6 November 2022

Festool CTM26 E AC (#1)

MachineInfoBox

Festool CTM26 E AC (#1)

Festool CTM26 E AC.jpg
Synonyms: hoover, "Chip & Dale"; DE: Staubsauger,
Werkstattsauger, Kesselsauger
Type: Shop Vac
Material: dry dirt in its usual setup,
wet dirt only with special bag
Location: Handheld Wood Tool Wall
Access Requirements:
Manual: libble.de
Tutors:




The two large Festool shop vacs can also be used as an extension cord of sorts and supports continuous (manual) or automatic (depending on the connected tool) action.

Make sure you uncoil the cord before use, and please be aware that our large Bosch chop saw draws too much power to be safely connected through the on-board outlet of a shop vac.

Use these shop vacs whenever dealing with dangerous dust - they are class "M" rated.

Troubleshooting

If Chip & Dale are not happy, they will let you know about it by beeping and maybe even ceasing to work. Please stop and fix the problem immediately!

  1. is the correct hose diameter selected on the little numbered dial in the front? It should be "27" and there is no reason to change that unless you connect a different hose!
  2. does the problem persist if you turn the shop Vac on with the hose pulled out? If not, check whether something got stuck in the hose and carefully remove the jam
  3. is the bag simply full? Please replace it (or report the problem if you can't find new bags)!
  4. RTFM

Compatible Tools

already compatible:

not tested/adapters needed:

Dust Adapter Design

If you a interested in designing and 3D-printing an adapter for a tool, here are the dimensions (pdf) to implement:

Dust Adapter Template image.png