Electronics Room

From CoMakingSpace Wiki

Revision as of 20:01, 2 June 2019 by NitramLegov (talk | contribs) (added galleries)

A panorama of the electronics room
E-Room Panorama.


In the electronics room you will also find our 3D printers.


Equipment

Power Supplies


Multimeters and other measuring equipment


Tools

  • iFixit Pro Tech Toolkit
    • The toolkit consists of a set of screwdriver and bits as well as various kinds of tools to take apart devices. Even though the bit set has an adapter to 1/4 inch bits don't use them in a cordless drill. The exact components can be found on the iFixit website.
  • 4mm Banana equipment/cables
    • 10x 1m 1mm2 cables
    • 4x aligator clips small
    • 2x aligator clips large
    • 2x needle probes
    • 2x small cable clamps
  • side cutters
    • "Knips" Knippex
    • cheaper ones (yellow) for the "dirty work"
    • 140mm larger ones
  • Wire strippers
    • min 0.2mm2

Soldering

Consumables

  • Solder
    • 0.5mm
    • 1mm
  • Electrical Tape
    • 12mm
    • 19mm
  • Flux
    • Flux pen (thin)
    • Flux paste
  • Heat Shrink Tube