Electronics Room

In the electronics room you will also find our 3D printers.

Equipment

Power Supplies

• RND 320-KD3005D
  • Regulated power supply with max 30V/5A output. The adjustment is in min. 10mV/1mA steps.

Multimeters

• Fluke 175
  • true RMS multimeter
  • Voltage, Current (10A), Resistance, Frequency, Capacity

Tools

• iFixit Pro Tech Toolkit
  • The toolkit consists of a set of screwdriver and bits as well as various kinds of tools to take apart devices. Even though the bit set has an adapter to 1/4 inch bits don't use them in a cordless drill. The exact components can be found on the iFixit website.

• 4mm Banana equipment/cables
  • 10x 1m 1mm² cables
  • 4x aligator clips small
  • 2x aligator clips large
  • 2x needle probes
  • 2x small cable clamps

• side cutters
  • "Knips" Knippex
  • cheaper ones (yellow) for the "dirty work"
  • 140mm larger ones

Soldering

• Soldering Irons

• Hot Air Soldering Station LF-852D
  • for (re-)work of SMD components
  • has various attachments for different IC packages

Consumables

• Solder
  • 0.5mm
  • 1mm

• Electrical Tape
  • 12mm
  • 19mm

• Flux
  • Flux pen (thin)
  • Flux paste