Electronics Room: Difference between revisions

From CoMakingSpace Wiki

(→‎Equipment: consumables)
(→‎Multimeters: added oscilloscopes)
Line 9: Line 9:
** Regulated power supply with max 30V/5A output. The adjustment is in min. 10mV/1mA steps.
** Regulated power supply with max 30V/5A output. The adjustment is in min. 10mV/1mA steps.


=== [[Multimeters]] ===
=== [[Multimeters]] and other measuring equipment===


* '''Fluke 175'''
* '''Fluke 175'''
** true RMS multimeter
** true RMS multimeter
** Voltage, Current (10A), Resistance, Frequency, Capacity
** Voltage, Current (10A), Resistance, Frequency, Capacity
* '''Oscilloscope Voltcraft GoldStar OS-9020A'''
** analog
** 20Mhz
** 2 Channel
* '''Oscilloscope HP DC-500 KC'''
* '''Function Generator Voltcraft FG-506'''
** 6MHz
** Sine, square, triangle


=== Tools ===
=== Tools ===

Revision as of 15:55, 10 April 2018

In the electronics room you will also find our 3D printers.


Equipment

Power Supplies

  • RND 320-KD3005D
    • Regulated power supply with max 30V/5A output. The adjustment is in min. 10mV/1mA steps.

Multimeters and other measuring equipment

  • Fluke 175
    • true RMS multimeter
    • Voltage, Current (10A), Resistance, Frequency, Capacity
  • Oscilloscope Voltcraft GoldStar OS-9020A
    • analog
    • 20Mhz
    • 2 Channel
  • Oscilloscope HP DC-500 KC
  • Function Generator Voltcraft FG-506
    • 6MHz
    • Sine, square, triangle

Tools

  • iFixit Pro Tech Toolkit
    • The toolkit consists of a set of screwdriver and bits as well as various kinds of tools to take apart devices. Even though the bit set has an adapter to 1/4 inch bits don't use them in a cordless drill. The exact components can be found on the iFixit website.
  • 4mm Banana equipment/cables
    • 10x 1m 1mm2 cables
    • 4x aligator clips small
    • 2x aligator clips large
    • 2x needle probes
    • 2x small cable clamps
  • side cutters
    • "Knips" Knippex
    • cheaper ones (yellow) for the "dirty work"
    • 140mm larger ones

Soldering

  • Hot Air Soldering Station LF-852D
    • for (re-)work of SMD components
    • has various attachments for different IC packages

Consumables

  • Solder
    • 0.5mm
    • 1mm
  • Electrical Tape
    • 12mm
    • 19mm
  • Flux
    • Flux pen (thin)
    • Flux paste